Sikalastic 841 ST is a liquid applied, pure polyurea membrane. Sikalastic 841 ST is a two part, elastic, 100% solids, very fast curing pure polyurea liquid applied membrane with very good chemical resistance. Sikalastic 841 ST shall not be used in closed structures containing biogenic sulphuric acid. Sikalastic 841 ST can only be spray applied with...
Teamac Anti-Corrosive Finish QD
A quick drying, anti-corrosive primer and finish in one formulated for direct application to prepared steel and cast iron.
Teamac Anti-Corrosive Finish QD is a fast drying anticorrosive finish, giving a good durable, protective coating to metal surfaces. Can be used over a suitable quick drying primer or as a primer and finish in one directly to prepared metals. Teamac Anti-Corrosive Finish QD is a quick drying coating ideal for structural steel and metal fabrications.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Spray
- 7-10m² per litre
- Touch Dry
- 1 Hour
|Greg Haines on 05/06/2019|| |
Hi . Can this be applied direct onto the steel on my narrowboat as a primer and top coat then a coating if your surgrip deck paint in top if that . ? Regards Greg.
Teamac Zinc Phosphate Primer is recommended on ferrous metals prior to the application of Teamac Suregrip Deck Paint.
|Damon Cook on 07/08/2018|| |
Hi, Ref: Teamac anti corrosive finish QD 1) Is this paint water or oil based? 2) Is it suitable for galvanised metal? Many thanks, Damon
This is a combined primer/topcoat, Xylene solvent/oil based system and it is suitable for galvanised metal, provided that the metal is suitably prepared - please refer to the product data sheet for details, available to download from the product page.
An aluminium-pigmented high solids mastic with excellent barrier and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading. Top Features Suitable as a topcoat for most tightly adhering existing coatings Contains 9 % aluminium by weight in the dry film Can be used as a...
Zingaluspray, a cross between the original Zingaspray and Aluspray in a handy 500ml aerosol spray can for touching up and repairing galvanising. Containing more aluminium flakes for a galvanised look, the spray still contains 92% Zinc in the dry film and provides cathodic protection to ferrous metals. Very economical - ideal for small...
A highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. Top Features Outstanding overall chemical resistance Excellent...
Zinga is a one-component anti-corrosion zinc coating system that provides cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint, and is certified to not spread flame or create smoke (BS476 parts 6&7). Can protect longer than hot-dip galvanising (at the...
An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets, including marine applications. Top Features Low-temperature version: 890 LT GF Self-priming and primer/finish capabilities Excellent abrasion resistance & hardness
Teamac Chasis Black is a quick drying anti-corrosive finish giving a durable, protective coating to vehicle chassis. Ideal for metal and steel areas on cars, trailers, trucks and buses etc.
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch...
Jotun Jotamastic 87 Alu WG is a 'Wintergrade' version of Jotamastic 87 Alu to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic 87 Alu WG is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product that is aluminium pigmented for improved barrier...
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Penguard Universal or Jotun Jotacote Universal N10 as great alternatives. A surface tolerant, aluminium pigmented, fast drying, high solids, high build product specially designed as a universal, all round, all year, new...
A high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. Top Features Low temperature cure Quick cure to handle Superior wetting properties and outstanding adhesion to steel Excellent edge retention
A high solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Top Features High solids; Low VOC formula VOC compliant Excellent...
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail.