Selemix 7-159 Direct Pro High Gloss (Slow)

7-159/E3.75K + 9-152/E1

Selemix 7-159 Direct Pro High Gloss (Slow) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer.

  • Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces
  • Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
  • Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
    • *Note: RAL Pearl colours shown are approximations only - matches will not be exact
  • Product can be purchased as a Two Component Pack, or as Base or Hardener only
  • High gloss finish with good colour and UV stability
  • Also available in Medium and Fast curing versions
  • Hammer Effects can be achieved by the additon of Selemix 6-540
  • For Industrial Use Only

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Product Type
Colour Group
Size
Finish
£117.85
£141.42 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Selemix 7-159 Direct Pro High Gloss (Slow) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer.

It has a high gloss finish with good colour and UV stability. Its good anticorrosive properties make it suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications.

Application is via Air-Assisted Airless Spray or Conventional Spray.

For Industrial Use Only.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Versatile, high solids 2-pack Acrylic PU finish
  • Can be applied directly to metal
  • Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces
  • Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
  • Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
    • *Note: RAL Pearl colours shown are approximations only - matches will not be exact
  • Product can be purchased as a Two Component Pack, or as Base or Hardener only
  • High gloss finish with good colour and UV stability
  • Also available in Medium and Fast curing versions
  • For Industrial Use Only



Surface Preparation


Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

Steel (Blast Cleaned):

  • Blast clean to ISO 8501-1 SA 2.5 with a blast profile of maximum 40 µm Rz

Steel:

  • Machine sand with P80-120 discs and degrease

Galvanised Steel:

  • Abrade with SCOTCHBRITE® and degrease

Aluminium:

  • Machine sand with P240-320 discs and degrease

Painted Surfaces:

  • Machine sand with P240-320 discs and degrease

Selemix Epoxy Primer or PU Primer:

  • Refer to Primer TDS for recoat time



Mixing


  • Thoroughly mix paint before activating and check colour before use



Features Conventional Spray Air-Assisted Airless

By Weight:

7-159 Topcoat

9-15x Hardener

1-159/1-160 Thinner

1000

330

100-200

1000

330

50-100

By Volume:

7-159 Topcoat

9-15x Hardener

1-159/1-160 Thinner

2.5

1

0.3-0.5 (10-20%)

2.5

1

0.1-0.3 (5-10%)

Viscosity (at 20°C): 28-35 secs DIN4 40-45 secs DIN4
Pot Life (at 20°C): 2.5-3 hours 1.5-2 hours



Mixing Ratio:

  • Selemix 7-159 Direct Pro High Gloss (Slow)
    • 2.5 parts base : 1 part hardener 

Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.



Application Notes


Features Conventional Spray Airless Spray
Spraygun Setup:

Nozzle:

Gravity: 1.8mm

Suction: 1.8-2.0mm

Pressure feed: 1.2-1.4mm

Nozzle:

9-11 thou

0.23-0.28mm

Air Pressure:

HVLP: 2 Bar

Standard: 2.5-3 Bar

2.5 Bar
Fluid Pressure: N/A 100 Bar
Number of coats: 2 2
Flash-off between coats: 15 mins 15-20 mins
Drying: Air dry or bake at 60°C for 30-45 mins Air dry or bake at 60°C for 30-45 mins
Flash-off before bake: 10-15 mins 10-15 mins
Wet Film Thickness: 150-175 microns (2 x 75-100µm) 150-175 microns
Dry Film Thickness: 90-110 microns 90-110 microns



Please see the Product Data Sheet for detailed Application Instructions before use.



Theoretical Coverage


  • Conventional Spray - 5.5-6.0 m²/L
  • Air-Assisted Airless Spray - 5.8-6.3 m²/L

Note: Please see the Product Data Sheet for detailed information.



Drying Times


Drying Times 20°C
Dust Free 20 mins (or 15 mins with Fast Hardener)
Touch Free 3 hours (or 2 hours with Fast Hardener)
Tape Free 6 hours (or 3 hours with Fast Hardener)
Handleable 8-10 hours (or 5-6 hours with Fast Hardener)
Hard Dry 16 hours (or 12-14 hours with Fast Hardener)
Stoving 30 minutes at 50°C (according to film thickness)
Overcoating time

Minimum: when Hard Dry

Maximum: 1 months by itself without sanding

Please Note: Lower temperature or film thickness higher than 100µm will extend drying times





Health & Safety


  • For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
  • THIS PRODUCT IS FOR INDUSTRIAL USE ONLY

Product Details
7-159/E3.75K + 9-152/E1

Data sheet

Manufacturer
Selemix
For Use By
Industrial Use
Water / Solvent Based
Solvent Based
For Use On
Steel
Galvanised Steel
Aluminium
Painted Surfaces
Sheen
90% Gloss
Single, Two or Three Pack
Two Pack
Mixing Ratio
2.5 to 1
Application
Spray
Airless Spray
Pot Life (at 20°C)
2.5-3 hours Conventional Spray / 1.5-2 hours Airless Spray
Recommended Dry Film Thickness
90-110 microns
Recommended Wet Film Thickness
150-175 microns
UN Number (Activator)
UN1263
UN Number (Base)
UN1263
Hard Dry
16 hours (or 12-14 hours with Fast Hardener)
Dust Dry (at 20°C)
20 mins (or 15 mins with Fast Hardener)
Colour(s)
Fully Tintable
Substrate
Aluminium
Substrate
Steel
Substrate
Blasted Steel
Substrate
Painted / Primed
Substrate
Galvanised Steel
Usages
High Corrosion Resistance
Usages
High UV Resistance
Usages
Process Efficiency
Usages
High Chemical Resistance
Usages
High Solids
Usages
Low VOC
Product Type
Direct to Substrate
Technologies
Solventborne
Technologies
2K
Application Methods
Conventional
Application Methods
Electrostatic
Application Methods
Airmix
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Selemix 1-159 Reactive Thinner For Acrylic

For use with selected products in the Selemix range including Selemix 7-159 Direct Pro High Gloss. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only More Information Delivery Info

Price £78.77
In Stock and Available for Delivery

Selemix 1-160 Slow Reactive Thinner For Acrylic

For use with selected products in the Selemix range including Selemix 7-159 Direct Pro High Gloss. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Industrial Use Only More Information Delivery Info

Price £78.77
In Stock and Available for Delivery

Selemix 7-159 Direct Pro High Gloss (Medium)

Versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer for steel, galvanised steel, aluminium and painted/primed surfaces. Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting...

Price £117.85
In Stock and Available for Delivery

Selemix 7-159 Direct Pro High Gloss (Fast)

Fast-curing, versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer to steel, galvanised steel, aluminium and painted/primed surfaces. Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial...

Price £117.85
In Stock and Available for Delivery

Selemix 6-540 Hammer Effect Additive

A silicone additive for Selemix solventborne cellulose, polyurethane and fast dry synthetic topcoats to achieve attractive Hammer Effect finishes. For use with: Selemix 7-610 and 7-611 Fast Dry Synthetic Topcoats Selemix 1K Cellulose Topcoats 7-510 Polyurethane Topcoat Selemix Direct Pro High Gloss (first coat must be sprayed without...

Price £20.36
In Stock and Available for Delivery