International Intertherm 181 is a two component, high temperature resistant topcoat based on inorganic silicate technology. Specifically designed for application over inorganic zinc primers, which provides a single specification to be used for the protection of all pipework from corrosion at continuous operating temperatures up to 400°C (752°F).
Jotun Solvalitt Midtherm Alu
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silicone acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
Jotun Solvalitt Midtherm Alu is designed as a heat resistant coating suitable for insulated and non insulated surfaces. Recommended in combination with an inorganic zinc silicate coating as a primer, providing heat resistance up to 260°C and long corrosion protection.
Features & Benefits
- Heat resistant up to 260°C
- Colour stable at high temperatures provides a good finish, well suited as finish coat
- Metallic silver finish
- Typical Coverage (per coat)
- 11.3m² per litre
- Touch Dry
- 15 mins
- Brush, Spray
Be the first to ask a question about this product!
Duram NS5 Metcote Etch Primer is a high adhesion metal primer with excellent etching qualities. This quality metal primer is solvent based and contains acids and adhesion promoters that etch the metal surface ensuring excellent adhesion. NS5 Metcote Etch Primer is quick drying and can be topcoated with most paints within two hours of application.
Jotun Epoxy HR is a two component polyamine cured novolac epoxy coating that is heat resistant up to 200°C and can be applied on hot substrates up to 150°C. It can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer.
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing....
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
Rust-Oleum Heat Resistant Paint 750°C is for use on new, bright or shot-blasted steel or well pre-treated coated surfaces. ADVANTAGES For continuous temperatures up to 650°C For peak temperatures up to 750°C For bare metal or slightly rusted surfaces To handle after 2 hours (at 20°C) Available in black satin-matt and Aluminium colours...
A heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and corrosive environments for galvanised steel and other...
Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It is heat resistant up to 150ºC/300ºF, and available in white, black, grey, silver, yellow, green, blue, and red colour finishes.
Coo-Var Heat Resistant Satin Black Enamel is a high quality, black paint for use at temperatures up to 600°C indirect heat. ADVANTAGES Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen
Jotun Solvalitt Zinc is a one component physically drying zinc rich silicone coating that is heat resistant up to 400°C. It can be used as a primer in atmospheric environments and suitable for properly prepared carbon steel substrates.
With improved heat resistance, Blackfriar High-Heat Resistant Paint (black) withstands temperatures of up to 600ºC, making it perfect for BBQs, stoves, grates, chimneys and other high-heat surfaces. One of the UKs leading heat resistant metal paints, buy it now at Rawlins Paints.
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).