International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.
Jotun Penguard Special B10
Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments.
Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates.
Jotun Penguard Special B10 is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Approved to meet the requirements of UK Highway Agency Item 110 for use on bridges and highway infrastructure.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Spray
- 17m² per litre
- Touch Dry
- 1.5 Hours
Be the first to ask a question about this product!
A heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.
Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. A high solids, high build product designed as a mid coat in systems for new construction in atmospheric...
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
Bradite Barrier Primer is a high performance two pack epoxy solvent based barrier primer for ferrous and non-ferrous metals, providing outstanding adhesion and excellent corrosion protection. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Suitable as a primer for a wide range of coatings Can be used...
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is a high quality anti-rust primer for Rust-Oleum CombiColor. The Anti-Corrosion Primer will ensure an even longer anti-rust protection on new or rusted steel surfaces and provides and enhances protection against corrosion. Recoatable after 2 hours For new / slightly rusted surfaces Grey for...
Sherwin-Williams Zinc Clad M501 is a 2-pack epoxy zinc rich anti-corrosive primer, providing anti-corrosive protection of steel surfaces prepared by abrasive blast cleaning. It may also be used as a repair primer for galvanized surfaces. Coverage Calculator
PPG SigmaShield 420 is a two-component, reinforced high solids polyamine adduct cured epoxy coating, ideal as a coating for cargo tanks of bulk or oil carriers and storage tanks. Buildcoat for underwater and boottop systems - No induction time Excellent abrasion and impact resistance, with outstanding water resistance, including seawater...
Jotun Penguard WF WG is a 'Wintergrade' version of Jotun Penguard WF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors.
HMG Synthetic BDX Primer is a high build, anti-corrosive, 1K alkyd primer for use under all HMG Synthetic topcoats. High build and excellent sandability after a short drying period. Excellent application and scratch filling properties. Available in white, light grey, dark grey and red oxide. Click to jump down to Technical Data
Part of the high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. Top Features Temperature resistant up to 204ºC Protects steel substrates Very good flexibility Excellent overall chemical resistance Very good abrasion resistance
International Interplus 256 is a low VOC, two component internally flexibilised high build surface tolerant epoxy primer. It is pigmented with aluminium and lamellar micaceous iron oxide for improved corrosion resistance and represents the second generation in surface tolerant technology.
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric...
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.