Nu-Steel TP Primer/Undercoat (part of the Nu-Steel TP System) is a two-part epoxy-based coating, forming part of the Nu-Steel TP System producing a decorative appearance with outstanding resistance to solvents and chemicals once the final coat is applied. for use on properly prepared steelwork, such as:

• Bridges.
• Aluminium/metal artwork.
• Railings.

...and a whole host of other steelwork structures.

Product Use in the Workplace

• Warehouse - Warehouses always try to be organised, clean and tidy but it is not always possible in all cases. In facilities that operate forklift trucks, footfall from workmen, or in environments that store chemicals, a protective coating on the metalwork is ideal.
• Factory - Exposed to contaminants and chemicals, metalwork in factories need a protective layer that lasts for years, resisting against chemicals whilst injecting colour onto the metal.
• Playground - Kids love colours. It makes playgrounds jump out at children and surrounds them with fun. Painted metal railings and playground equipment is sure to tick the fun box, whilst offering peace of mind protection.

Features & Benefits

• Excellent opacity giving good obliterating power prior to the application of Nu-Steel TP Finish. 
• Available in white, grey and buff.
• Epoxy-based.
• 10m²/Litre approx. coverage.
• 12-month shelf life if stored in original sealed container.

Preparation

For use on properly prepared steel such as parapet/guard rails and architectural steelwork. Ensure surfaces to be treated are clean, free from contamination and dry.

Application

By brush/roller or spray. Should not be applied at temperatures below 5°C or when the relative humidity exceeds 85%. All equipment should be cleaned with T5 Thinners. Conventional thinners and brush cleaners are not effective.

Store away from direct sunlight and sources of heat. Protect from frost.