Fosroc Thinner/Cleaner
Fosroc Thinner/Cleaner is for use with selected products within the Fosroc range.More Information Delivery Info
£42.89 (incl. VAT)
£35.74 (ex. VAT)
Fosroc Galvafroid is a zinc rich coating formulated as an easily applied, cold galvanising protection against corrosion on all ferrous metals with a mid-grey, matt finish.
Please note: Colours shown are for illustrative purposes only
Uses
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Gokul Gireesh on 2023-12-05 13:07:38 | Question: I have a steel structure which is hot dipped galvanised. Now there are sections of the structure that have shown corrosion. Can I clean back the corrosion and coat the entire structure in galvafroid for a uniform final finish? Does galvafroid stick on to hot dipped galvanised metal? |
Answer from Rawlins’ Technical Team: Yes, this product can be used on galvanised steel. Assuming the galvanised steel is thoroughly cleaned and degreased as detailed in the technical datasheet, to ensure the removal of all oils, grease, mill scale and rusted areas, we'd firstly recommend preparing the galvanised areas with Teamac Mordant Solution (T Wash), which increase the adhesive properties for you to overcoat with Fosroc Galvafroid. | |
Tom Barnard on 2023-08-24 09:25:44 | Question: I am looking to specify a coating for our steel doors. Our current spec is: 01. ALL SUBSTRATE METALS SHALL BE PREPARED TO SA 2.5 02. ALL COATING SHALL BE 3 PACK MARINE GRADE GLOSS COATING. 03. COLOUR: RAL BS4800 HOLLYBUSH 14 C 39 We have experienced issues with paint delaminating from the doors due to rusting of the substrate steel. can fosroc Galvafroid be used as a primer for 3 pack marine grade gloss coatings. |
Answer from Rawlins’ Technical Team: This product may be painted to improve durability and/or enhance appearance, but it should not be rubbed down to obtain a smooth surface for finishing paints. For general purposes a good oil bound or alkyd paint should be used. Fosroc Dekguard A Plus can be used to provide a decorative finish to Fosroc Galvafroid, with a 2 coat application recommended. Where any work is subject to corrosive and marine conditions a non-saponifiable finishing paint should be used such as Chlorinated Rubber. It is advisable to allow Fosroc Galvafroid to weather for at least 3 days prior to applying the finishing coat. Cellulose and bituminous paint are not generally suitable for over-painting Fosroc Galvafroid. Assuming the proposed 3 pack marine paint meets the above requirements, then Fosroc Galvafroid can be used as a Primer. | |
Sean Parkinson on 2022-10-18 15:46:03 | Question: Good Afternoon If steel reinforcement bars are coated with galvafroid, can they be cast into concrete? Will this affect the bond of the concrete to the bar? Thanks |
Answer from Rawlins’ Technical Team: Yes, the bond to rebar is not based the metal but the ridges and deformations of the bar so as long as it’s not a smooth bar it will bond fine. | |
Fosroc Galvafroid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Thinner/Cleaner is for use with selected products within the Fosroc range.More Information Delivery Info
£42.89 (incl. VAT)
£35.74 (ex. VAT)