Cromadex 635 Two Pack Polyurethane Leatherette Topcoat
Cromadex 635 Two Pack Polyurethane Leatherette Topcoat is a two pack polyurethane leatherette topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour retention adding value to the finished article, whilst the leatherette effect can help differentiate your finish. Available in the full Cromadex range of colours, including BS & RAL.
Cromadex 635 Two Pack Polyurethane Leatherette Topcoat is a two pack polyurethane leatherette topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour retention adding value to the finished article, whilst the leatherette effect can help differentiate your finish.
The addition of Cromadex 600 Rapidcure Accelerator can speed up the drying time helping improve productivity in your factory. Cromadex 635 is available in the full Cromadex range of colours, including BS, RAL and special matches all in a lead free finish. Life expectancy of up to 15 years in a C3 (as determined in ISO12944) external environment when used with a suitable Cromadex primer. See Extra Life brochure for full details.
Suitable Substrates and Preparation
Mild Steel: Degrease with Cromadex 678 Spirit Wipe and abrade steel with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2. Apply suitable Cromadex primer.
Aluminium & Galvanised Steel: Apply Cromadex 903 Chromate-Free Etch Primer (then other Cromadex primer is required to increase film build)
Stainless Steel: Use of Cromadex 903, AQ58, 750 or 850 primer is required.
GRP: Remove release coat, degrease and abrade with P280.
Powder Coating: Degrease and abrade with P280.
Plastics: Direct adhesion to ABS, Noryl & PU Foam (Rigid), for HIPS, Acrylic, Polycarbonate, PVC and PU Foam (flexible) consult the Technical Department. Clean with a suitable anti-static cleaner prior to coating.
6L unit comprises;
5L of 635 Base + 1L of 600 Curing Agent
24L unit comprises;
20L of 635 Base + 4L of 600 Curing Agent
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- For Use On
- Aluminium, Galvanised Steel, Stainless Steel, Mild Steel, Plastic
- Application Method
- Fully Tintable
- Single, Two or Three Pack
- Pack Size
- 6L, 24L
- Touch Dry
- 45 mins
- UN Number
Be the first to ask a question about this product!