- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Cromadex 800 Two Pack Non-Isocyanate Acrylic Topcoat
Cromadex 800 Two Pack Non-Isocyanate Acrylic Topcoat is a two pack non-isocyanate acrylic topcoat with excellent exterior durability and chemical resistance. The product uses unique resin and pigment technology to enable a wide variety of applications and a durable finish. The product is formulated without isocyanate helping to reduce health and safety concerns.
Description
Cromadex 800 Two Pack Non-Isocyanate Acrylic Topcoat is a two pack non-isocyanate acrylic topcoat with excellent exterior durability and chemical resistance. The product uses unique resin and pigment technology to enable a wide variety of applications and a durable finish. The product is formulated without isocyanate helping to reduce health and safety concerns.
The product is also available in aerosols to help with on-site Interpon® powder coating repairs. Cromadex 800 is available in the full Cromadex range of colours and gloss levels, including BS, RAL, metallic, sparkles and special matches all in a lead free finish. Life expectancy of up to 9 years in a C3 (as determined in ISO12944) external environment when used with a suitable Cromadex primer. See Extra Life brochure for full details.
Suitable Substrates and Preparation
Mild Steel: Degrease with and abrade steel with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2. Apply suitable Cromadex primer.
Aluminium & Galvanised Steel: Apply Cromadex 903 Chromate-Free Etch Primer (then other Cromadex primer is required to increase film build).
Stainless Steel: Use of Cromadex 903, AQ58, 750 or 850 primer is required.
GRP: Remove release coat, degrease and abrade with P280.
Powder Coating: Degrease and abrade with P280.
Plastics: Direct adhesion to ABS, Noryl & PU Foam (Rigid), HIPS, Acrylic, uPVC, Polycarbonate, PVC and PU Foam (flexible). Clean with a suitable antistatic cleaner prior to coating. For Polypropylene use an adhesion promoter.
6L unit comprises;
5L of 800 Base + 1L of 800 Curing Agent
24L unit comprises;
20L of 800 Base + 4L of 800 Curing Agent
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
Data sheet
- For Use On
- Aluminium, Galvanised Steel, Stainless Steel, Mild Steel, Plastic
- Application Method
- Spray
- Sheen
- Matt, Gloss, Semi-Gloss, Eggshell
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 6L, 24L
- Application
- Spray
- Touch Dry
- 15 mins
- UN Number
- UN1263
Be the first to ask a question about this product!