PPG Thinner 21-06
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
PPG PSX 700 is a two-component, engineered siloxane coating that can be applied directly over inorganic zinc. Offers good resistance to splash and spillage of chemicals.
PPG PSX 700 is a two-component, engineered siloxane coating that can be applied directly over inorganic zinc. Offers good resistance to splash and spillage of chemicals and can be applied by brush, roller or spray, without thinning.
Please Note: Fast Drying Hardener is available on request and subject to extended lead times please contact our Technical Department on 0113 2455450 (option 1) or send a message to [email protected] for details.
Basic data at 20°C (68°F)
Data for Mixed Product | |
---|---|
Number of components | Two |
Mass density | 1.4 kg/l (11.3 lb/US gal) |
Volume solids | 90 ± 2% |
VOC (supplied) | Directive 1999/13/EC, SED: max. 119.0 g/kg. max. 164.0 g/l (approx. 1.4 lb/US gal) EPA Method 24: 0.7 lb/US gal (84.0 g/l) |
Temperature resistance (continuous) | To 120°C (250°F) |
Recommended dry film thickness | 75 - 175 µm (3.0 - 7.0 mils) per coat |
Theoretical spreading rate | 7.2 m²/l for 125 µm (289 ft²/US gal for 5.0 mils) |
Dry to touch | 2 hours |
Overcoating interval | Minimum: 3 hours. Maximum: Unlimited |
Shelf life | Base: at least 36 months when stored cool and dry. Hardener: at least 24 months when stored cool and dry |
Notes:
See addtional data: Spreading rate and film thickness, Overcoating intervals and Curing time. When applying more than one coat, it is recommended that the total DFT should not exceed 250 µm (10.0 mils). Colour will drift at elevated temperatures.<p>
Recommended Substrate Conditions and Temperatures
Note: FD hardener should be used when ambient temperature is below 5°C (40°F).
System Specification
Primers: Direct to substrate, DIMETCOTE Series, AMERCOAT 68 Series, AMERLOCK 400 / 2 Series, SIGMAZINC Series, AMERCOAT Epoxies and SIGMA Epoxies.
Instructions for Use
Mixing ratio by volume: base to hardener 80:20 (4:1). Use a power mixer powered by an air or explosion-proof electric motor. No induction time required. Pot life is 4 hours at 20°C (68°F); Note: See ADDITIONAL DATA – Pot life.
Air spray
Recommended thinner: THINNER 60-12 (AMERCOAT 911) or THINNER 21-06 (AMERCOAT 65) for global, THINNER 21-25 (AMERCOAT 101) is recommended for above 90°F (32°C) in US only
Volume of thinner: 5 - 10%, depending on required thickness and application conditions
Nozzle orifice: 1.5 – 2.0 mm (approx. 0.060 – 0.079 in)
Nozzle pressure: 0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)
Airless spray
Recommended thinner: THINNER 60-12 (AMERCOAT 911) or THINNER 21-06 (AMERCOAT 65) for global, THINNER 21-25 (AMERCOAT 101) is recommended for above 90°F (32°C) in US only
Volume of thinner: 0 - 5%, depending on required thickness and application conditions
Nozzle orifice: Approx. 0.38 – 0.48 mm (0.015 – 0.019 in)
Nozzle pressure: 20.0 MPa (approx. 200 bar; 2901 p.s.i.)
Brush/roller
The recommended DFT cannot be reached in one coat. Use a high quality natural bristle brush and/or solvent resistant, short nap roller. Ensure brush / roller is well loaded to void air entrainment. Be sure to maintain a wet edge.
Cleaning solvent
THINNER 90-53, THINNER 90-58 (AMERCOAT 12) or THINNER 60-12 (AMERCOAT 911)
Spreading Rate and Film Thickness
DFTTheoretical Spreading Rate
75 µm (3.0 mils) | 12.0 m²/l (481 ft²/US gal) |
125 µm (5.0 mils) | 7.2 m²/l (289 ft²/US gal) |
175 µm (7.0 mils) | 5.1 m²/l (206 ft²/US gal) |
Pot Life
10°C (50°F) = 6.5 hours
20°C (68°F) = 4 hours
30°C (86°F) = 1.5 hours
Note:
Same pot life between normal and FD hardener.
Overcoating interval for DFT up to 175 µm (7.0 mils) at RH 40% or above~
Itself (when PSX7OO is used) Miniumum
Maximum N/A
N/A 20 hours
Unlimited 9 hours
Unlimited 4.5 hours
Unlimited 3 hours
Unlimited
Overcoating with... | Interval | 0°C (32°F) | 5°C (41°F) | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) |
Itself (when PSX700FD is used) | Minimum Maximum | 20 hours Unlimited | 12 hours Unlimited | 7 hours Unlimited | 3 hours Unlimited | 2 hours Unlimited |
Notes:
Surface should be dry and free from any contamination. When re-coat between dry through time and 7 days, solvent wipe surface with any of PSX 700 thinners prior to application of the second coat of PSX 700. Hardener manufactured in Europe is fast drying version only with "PSX 700 FDE Hardener" name.
Curing time with standard hardener for DFT up to 175 µm (7.0 mils) at RH 40% or above
Substrate temperature | Dry to touch | Dry to handle |
5°C (41°F) | 9 hours | 24 hours |
10°C (50°F) | 6 hours | 11 hours |
20°C (68°F) | 3 hours | 6 hours |
30°C (86°F) | 1.5 hours | 4 hours |
Curing time with FD (fast drying) hardener for DFT up to 175 µm (7.0 mils) at RH 40% or above
Substrate temperature | Dry to touch | Dry to handle |
0°C (32°F) | 9 hours | 24 hours |
5°C (41°F) | 7 hours | 16 hours |
10°C (50°F) | 4.5 hours | 8.5 hours |
20°C (68°F) | 2 hours | 4.5 hours |
30°C (86°F) | 1 hours | 3 hours |
Notes:
Adequate ventilation must be maintained during application and curing. Hardener manufactured in Europe is fast drying version only with "PSX 700 FDE Hardener" name.
Please Note: Fast Drying Hardener is available on request and subject to extended lead times please contact our Technical Department on 0113 2455450 (option 1) or send a message to [email protected] for details.
Safety Precautions
This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes. For paint and recommended thinners, see information sheets 1430, 1431 and relevant Material Safety Data Sheets.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
PPG PSX 700 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£66.23 (incl. VAT)
£55.19 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)