Tikkurila Temadur SC-F 80 is a two-component fast-drying glossy polyurethane paint, containing anti-corrosive pigments, developed for single-coat painting agricultural and earth-moving machinery.
The active anti-corrosive pigments ensure corrosion resistance, even in severe climatic conditions, and meets the requirements set in Volvo STD 423-0014, accelerated corrosion test for 6 weeks. When applied as a single-coat, corrosivity class C4-M can be achieved.
Also suitable to be used as a topcoat in epoxy/polyurethane systems exposed to weathering and chemical stress, e.g. storage tank exteriors, steel framework and other steel structures.
Huge range of colours available from RAL, BS & NCS.
Huge range of colours available from RAL, BS & NCS
2 component
Fast drying
Especially developed for single-coat painting agricultural and earth-moving machinery
Active anti-corrosive pigments ensure corrosion resistance even in severe climatic conditions
Can help speeding up the painting process and decrease the overall costs of the painting system
Can be applied up to 125µm at once without sagging
Excellent weathering and abrasion resistance
A durable, easy-to-clean and non-chalking topcoat with good gloss and colour retention
When applied as a single-coat, corrosivity class C4-M can be achieved
Meets the requirements set in Volvo STD 423-0014, accelerated corrosion test for 6 weeks
Also suitable to be used as a topcoat in epoxy/polyurethane systems exposed to weathering and chemical stress, e.g. storage tank exteriors, steel framework and other steel structures
For industrial & Professional use only.
Technical Data
Volume Solids:
65±2% (ISO 3233)
Weight Solids:
80±2%
Specific Gravity:
1.4±0.1 kg / l (mixed)
Mixing Ratio:
Base: 4 parts by volume (Temadur SC-F 80)
Hardener: 1 part by volume (008 7640)
Pot Life (23℃):
app. 1 hour
VOC:
The Volatile Organic Compounds amount (ISO 11890) is 320 g/litre of paint mixture.
VOC content of the paint mixture (thinned 18% by volume) is 420 g/l.
Recommended Film Thickness & Theoretical Coverage
Recommended film thicknesses/one coat application
Theoretical coverage
wet
dry
125µm
80µm
8.0 m²/l
190µm
120µm
5.3 m²/l
Recommended film thicknesses/as a topcoat
Theoretical coverage
wet
dry
65µm
40µm
15.4 m²/l
95µm
60µm
10.5 m²/l
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 60µm
5℃
10℃
23℃
35℃
Dust dry, after
2h
1½h
50min
30min
Touch dry, after
8h
6h
3h
2h
Recoatable without abrading, after
No limitations
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. When forced drying in temperatures 50–100ºC, use flash-off time between 5–30 minutes, depending on the wet film thickness and the actual temperature.
Surface Preparation
Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces:
Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means
Repair any damage to the primer coat
Note the overcoating time of primer (ISO 12944-4)
Recommended Primers
Temadur 20
Temacoat GPL-S Primer
Temacoat Primer
Temacoat GPL-S MIO
Temabond ST 200
Temabond ST 300
Temazinc 77
Temanyl PVB
Fontecryl AP
Recommended Topcoats
Temadur Clear
Temadur HB 80
Temadur HS 90
Temadur SC-F 20
Temadur SC-F 50
Temadur SC-F 80
Temathane 90
Temathane PC 80
Application Conditions
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below +5ºC during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
First stir base and hardener separately.
The correct proportions of base and hardener must be mixed thoroughly before use.
Use power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
For airless spraying
The product is thinned depending on the temperature of the components and shape of the object approximately 0–15%
Recommended nozzle tip is 0.011"–0.015" and pressure 160–200 bar
Spray angle shall be chosen according to the shape of the object
In order to reach thicker coats (over 100µm DFT) use always "wet- in-wet" technique
For conventional spraying
The product is thinned approximately 15–18% to the viscosity 20–25s (DIN4)
Recommended nozzle tip is 1.6–1.8 mm and pressure 3–4 bar
Thinners
Thinner 1048
Thinner 1067
Cleaning of Equipment
Thinner 1048
Thinner 1067
Product Details
4725-928083
Data sheet
Manufacturer
Tikkurila
Interior / Exterior Use
Exterior Use
For Use On
Steel
Application Method
Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Pack Size
10L
Parts
2
Interior/Exterior Use
Exterior
Solvent
Mixture - see safety data sheet
Mixing Ratio
4:1
Suitable Substrates
Steel
Key Features
Excellent weathering and abrasion resistance
Key Features
Huge colour range, from RAL, BS & NCS
Application
Spray
Touch Dry (at 20°C)
3 hours
Coverage
5.3 to 15.4 m²/l
Recommended Thinner/Cleaner
Thinner 1048, Thinner 1067
Unit Contents
Base & hardener
Compatible Primers
Temadur 20; for more, see product data sheet
Compatible Topcoats
Temadur SC-F 80, Temadur Clear; for more, see product data sheet
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temadur SC-F 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...