"

Jotun Barrier Plus

Jotun Barrier Plus View larger
Typical Coverage (per coat)10m² per litre
Touch Dry25 mins
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

This Jotun Paints product is a high solids, very high zinc dust content primer for highly corrosive environments and can be applied down to 0°C surface temperature.

Jotun Barrier Plus is a two component polyamine cured zinc rich epoxy coating.

Read Full Description

More details

£146.04 + VAT

Jotun Barrier Plus is a two component polyamine cured zinc rich epoxy coating. It is a high solids, very high zinc dust containing product that provides excellent corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coatings and damaged galvanised steel substrates. It can be applied down to 0°C surface temperature.

Jotun Barrier Plus is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.

Approvals and Certificates

  • Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.
  • It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944/ISO 20340.
  • This product complies with ASTM D520 type I zinc dust.
  • Product testing shows superior performance in adhesion/cohesion and electrical conductivity when compared to traditional zinc rich epoxy coatings.

Additional certificates and approvals may be available on request.

Features & Benefits

  • Zinc epoxy with zinc silicate properties
  • Fast dry-to-recoat and fast dry-to-handle
  • All year around
  • Designed for protection in severe corrosive environments
  • Certified in systems for Norsok system 1
  • Can be applied down to 0°C

Zinc epoxy with zinc silicate properties
New binder technology shows superior performance in adhesion/cohesion and electrical conductivity between the zinc particles and the steel when compared to traditional zinc rich epoxy coatings.

Surface treatment

  • New construction: min. Sa 2½ (ISO 8501-1:2007)
  • Maintenance: UHPWJ to WJ2 (NACE No.5/SSPC-SP 12)

“Green step” – Health, Environment and Safety

  • High solids and low VOC
  • Pure zinc dust (ASTM D520 type II)

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Barrier Plus TDS

Download

Barrier Plus Comp A MSDS

Download

Barrier Plus Comp B MSDS

Download

Barrier Plus Application Guide

Download