Coo-Var WB101, a water based polyurethane two pack anti-graffiti coating for interior or exterior use, with low odour and fast drying.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Coo-Var WB101 is a water based polyurethane two pack anti-graffiti coating for interior or exterior use, with low odour and fast drying.
Drying to a hard, easy to clean finish, WB101 can be used over compatible coloured paints. Ideal where a water based product is required, WB101 is ideal for bridges, walls, subways, public toilets and stadiums. A case study for an underpass in Milton keynes, Saxonville from 2012 can be downloaded from our "attachments" section above.
| Typical Specific Gravity | 1.08 @ 20 °C |
| Volume Solids | 53 |
| Wet Film Thickness | 185 microns |
| Dry Film Thickness | 100 to 105 microns |
| Expected Spreading Rate | 5 to 8 sq.m / kilo @ 100 to 105 microns D.F.T |
| The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application. | |
| Typical Viscosity | N/A |
| Flash Point | 45 °C (closed cup) |
| Potlife | 2 to 3 hours @ 20 °C |
| Once the parts are mixed together the material has to be used within the time stated. | |
| VOC Content | 75 g / litre |
| @ Recommended D.F.T | |
|---|---|
| Initial cure: | 1 to 2 hours @ 20 °C |
| Hard dry: | 24 hours @ 20 °C |
| Full cure: | 5 to 7 days @ 20 °C |
| Low temperature and high humidity will adversely affect application, curing and performance of any coating. | |
Disposable application equipment is recommended. Ensure that the correct film thickness is achieved as over applying the coating can cause imperfections in the finished film.
| Application restrictions | Do not apply below 5 °C. | |
| Method | Brush or Short pile roller | |
| Thinner (Max vol) | Do Not Thin. | |
| Nozzle size | N/A | |
| Nozzle pressure | N/A | |
| Cleaning solvent | Water | |
| Recoat interval | Minimum 16 hrs | Maximum 72 hrs |
All surfaces should be laitance free, clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
The entire contents of the hardener tin must be added to the resin base and mixed thoroughly, preferably with a low speed drill and mixing paddle for two minutes ensuring the mixing action takes in the full depth and perimeter of the container. Badly activated or incorrectly mixed materials will affect performance and may cause early failure.
Air temperature 5-30°C, Humidity 85% RH maximum, non condensing conditions.
Apply direct, can be used over most paint surfaces, if in doubt test a small area first.
Apply at least 2 coats of WB101
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Gary Trull on 2019-07-29 08:22:56 | Question: Can Coo-Var WB101 Anti-Graffiti Coating be used on painted garage doors (Metal) |
Answer from Rawlins’ Technical Team: Yes, before applying existing painted surfaces should be compatible, cleaned, degreased and sanded to ensure an adequate "key" is produced. | |
| Emma Bailey on 2019-06-07 11:08:49 | Question: Hello Can your product Coo-Var WB101 Anti Graffiti coating be used on top of Acrylic paint on external brick work? Will it yellow with age and how much meter coverage can be got from one tin of 5kg of the product? Many Thanks for your time Emma |
Answer from Rawlins’ Technical Team: Coo-Var WB101 Anti-Graffiti Coating can be used over water based acrylic paint externally, as it’s clear it won’t yellow but it won't stop the acrylic itself yellowing if this isn't UV stable. Spreading Rate is 5-8 sqm/kg. | |
| Alexandra Ghimisi on 2017-12-11 11:01:08 | Question: I am a mural painter and need a product to varnish my art work. It is painted indoor with acrylic paint. I want to try your product-COO-VAR WB101 because of its properties and mainly because is off-gloss. My questions are: 1. Has it a matt finish? 2. Has it a non-yellow finish in time? 3. Can be applied on top of a gloss varnish already I've applied? 4. For how many years is it guaranteed?Thank you, Alexandra G. |
Answer from Rawlins’ Technical Team: We would advise carrying out a test for compatibility with Rust-Oleum 4900 Polycoat 2K. This is available in a matt finish (Coo-Var WB101 Anti-Graffiti Coating is a glossy finish), Rust-Oleum 4900 Polycoat 2K does not yellow and can be used internally and externally over various pre-painted surfaces. | |
Coo-Var WB101 Anti-Graffiti Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
