Tremco CS150 Acrylic Primer is a universal primer for porous substrates. Specifically designed for use as a primer for polymer screed applications or beneath smoothing compounds on porous substrates.
Easy to apply
Helps to prevent pin-holing
Helps maintain the flow characteristics of the screed
Coverage of approximately 8m² per litre depending on substrate
Please note: Colours shown are approximate and are for illustrative purposes only
Tremco CS150 Acrylic Primer is a universal primer for porous substrates. Specifically designed for use as a primer for polymer screed applications or beneath smoothing compounds on porous substrates.
The product works by removing the adverse effects of suction from the substrate including pin-holing and premature drying of the screed, which result in the loss of desired flow characteristics.
Benefits:
Easy to apply
Helps to prevent pin-holing
Helps maintain the flow characteristics of the screed
Coverage of approximately 8m² per litre depending on substrate
Ensure all surfaces to be coated are clean, dry, frost free and free from grease, oil, dirt, dust, loose friable material and any other contaminants
Mechanical preparation, using an enclosed shot blasting machine, may be recommended and should be followed by thorough vacuuming to remove all surface dust
Application:
Apply by brush or roller ensuring a continuous film, avoiding puddles and ensuring all the surface is coated
Technical Data:
Property
Result
Composition
An aqueous based co-polymer dispersion
Density
1.02 g/ml
pH
7-9
Solubility in Water
Miscible
Freezing Point
0°C
Coverage
8m² per litre depending on substrate
Storage
Store between +5°C and +30°C.
Shelf Life
6 Months when stored in its original unopened containers
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tremco SX200 Self Levelling Smoothing Compound is a fast drying, self levelling, pump applied underlayment, for levelling of concrete floors before the installation of floor coverings.
Provides good resistance to impact, point loading and abrasion
Ideally suited to floors in office buildings, shops, public buildings, schools, hospitals,...
Tremco SX250 Moisture Tolerant Smoothing Compound is a pre-smoothing and repair compound for clean, sound, porous substrates. SX250 is specifically designed for preparation of interior applications and can be applied by hand or by pump.
Suitable for use below a damp proof membrane
High compressive strength for heavy traffic applications...
Tremco SX500 Rapid Drying Smoothing Compound is a protein free moisture tolerant, fast drying, smoothing compound for interior applications. SX500 is designed for application to existing floors prior to the application of floor coverings including: vinyl, carpets, ceramic tiles, wood, etc.
Accepts both textile and resilient floor coverings...
Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products.
Walk on after 2 hours, floor coverings can be...
