Graco Mark V Max Standard Heavy Duty Sprayer
We no longer stock this product.
PPG NovaGuard 890 is a two-component, solvent-free, amine-cured novolac phenolic epoxy coating that is ideal for use in storage of unleaded gasolines blended up to 100% ethanol (E5 up to E100), biodiesels (EN14214) & crude oil up to 120°C (250°F).
PPG NovaGuard 890 is a two-component, solvent-free, amine-cured novolac phenolic epoxy coating. This 1-coat tank coating system is suitable for use in storage of unleaded gasolines, biodiesels and crude oil with reduced explosion risks and fire hazards.
NovaGuard 890 has good chemical resistance against a wide range of solvents and chemicals and meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes). The coating can be applied by heavy-duty, single-feed, airless spray equipment (60:1), leaving a semi gloss and smooth finish that is easy to clean.
Please note: This product is subject to a minimum order quantity of 440L and has an approximate delivery lead time of 21-28 days
Basic data at 20°C (68°F)
Data for Mixed Product | |
---|---|
Mass density | 1.4 kg/l (11.7 lb/US gal) |
Volume solids | 100% |
VOC (Supplied) | Directive 1999/13/EC, SED: max. 94.0 g/kg |
max. 131.0 g/l (approx. 1.1 lb/US gal) | |
EPA Method 24: 92.0 g/ltr (0.8 lb/USgal) | |
Recommended dry film thickness | 300 - 600 µm (12.0 - 24.0 mils) depending on system |
Theoretical spreading rate | 3.3 m²/l for 300 µm (134 ft²/US gal for 12.0 mils) |
Dry to touch | 8 hours |
Overcoating Interval | Minimum: 24 hours |
Maximum: 2 months | |
Full Cure | After 6 days |
Notes:
Recommended Substrate Conditions & Temperatures
Substrate conditions
Substrate temperature
Instructions For Use
Mixing ratio by volume: base to hardener 80:20 (4:1)
Application
Airless spray
Nozzle orifice
Nozzle pressure
Brush
Cleaning solvent
Notes:
Spreading rate and film thickness | |
---|---|
DFT | Theoretical spreading rate |
300 µm (12.0 mils) | 3.3 m²/l (134 ft²/US gal) |
600 µm (24.0 mils) | 1.7 m²/l (67 ft²/US gal) |
Note: Maximum DFT when brushing: 150 µm (6.0 mils)
Measuring Wet Film Thickness
Measuring Dry Film Thickness
Overcoating interval for DFT up to 300 µm (12.0 mils) | |||||
---|---|---|---|---|---|
Overcoating with... | Interval | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | |
Itself | Minimum | 36 hours | 24 hours | 16 hours | |
Maximum | 3 months | 2 months | 1 month |
Notes:
Curing time for DFT up to 300 µm (12.0 mils) | |||
---|---|---|---|
Substrate temperature | Dry to handle | Minimum cure time for purely aliphatic petroleum product (see note) | Minimum cure time for all other chemicals |
10°C (50°F) | 40 hours | 7 days | 10 days |
20°C (68°F) | 18 hours | 3 days | 6 days |
30°C (86°F) | 12 hours | 48 hours | 4 days |
40°C (104°F) | 8 hours | 24 hours | 3 days |
Notes:
Pot life (at application viscosity) | |
---|---|
Mixed product temperature | Pot life |
10°C (50°F) | 2 hours |
20°C (68°F) | 1 hour |
30°C (86°F) | 45 minutes |
Note: Due to exothermic reaction, temperature during and after mixing may increase
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
PPG NovaGuard 890 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
We no longer stock this product.
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.