Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
Sherwin-Williams Macropoxy 646 - Aluminium is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting. Please note: Aluminium is made to order with an extended lead time of 14 days and a minimum order quantity of 200L Also readily available in 400+ colours,...
£153.98 (incl. VAT)
£128.32 (ex. VAT)
Coo-Var Hammercote Smooth Enamel - Special Colours is a premium quality durable coating which provides a glossy smooth finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use....
£127.45 (incl. VAT)
£106.21 (ex. VAT)
Tikkurila Fontecryl SC-MR 10 can be applied directly onto steel without any priming. It adheres extremely well to the surface and forms a tight, protective paint film. Water-borne, one-component fast-drying acrylic-based paint which contains active anti- corrosive pigments.Fast drying enables rapid overcoating, thus shortening overall...
£294.66 (incl. VAT)
£245.55 (ex. VAT)
Tikkurila Panssarimaali is a quick drying semi-gloss alkyd anti-corrosive single pack coating for steel, cladding and roofing. Ideal for metal-sheeted roofs, water channels, down pipes, banisters and various steel constructions.Excellent weather resistance Ideal for industrial and maritime atmospheres Heat resistant up to 80 °C (ISO...
£34.79 (incl. VAT)
£28.99 (ex. VAT)
Temafloor Rostex Super Akva Metal Primer completes the waterborne coating system for treating metal sheeted roofs and other metal surfaces from the bottom to the top. After priming with Rostex Super Akva use waterborne Panssari Akva Roof Paint or Luja Finishing Paint in interior use as a topcoat. Examples of use includes metal-sheeted roofs,...
£22.02 (incl. VAT)
£18.35 (ex. VAT)
Rostex Super Metal Primer is suitable for priming steel, zinc-coated steel and non-slip aluminum surfaces subject to heavier stress than usual, when the adhesion of normal alkyd primers will not be sufficient or would take too long to dry. Also suitable for copper, brass, stainless steel, pural, polyester, acryl, and obsolete PVC-coated steel...
£32.89 (incl. VAT)
£27.41 (ex. VAT)
Fosroc Nitocote EP405 is a two-part, ground gas resistant, solvent free, epoxy resin coating for waterproofing and protecting concrete structures. It is supplied in pre-measured quantities ready for site mixing and application.As a gas resistant waterproof coating it provides a Type A waterproofing barrier as defined in BS8102:2009 and a...
£253.54 (incl. VAT)
£211.28 (ex. VAT)
Tikkurila Fontecoat FD20 is a two-component fast-curing epoxy paint for long-term corrosion protection of framework, service platforms, and conveyors, as well as other steelwork, machinery, and equipment. Water-borne and doesn’t create dust when sprayed, making it both environmentally friendly and safe to apply. When used with Temakeep...
Tikkurila Acoustics is a one-component water-borne noise damping coating for airless application. Recommended to be used on steel roofing sheets, metal surfaces in vehicles and railway cars, ventilation ducts and other metal surfaces where vibration and noise problem occurs.Excellent acoustic damping and vibration absorbing properties...
£289.72 (incl. VAT)
£241.43 (ex. VAT)
Tikkurila Fontecryl SC-EF 50, a water-borne, one-component fast drying alkyd modified acrylic paint with special anti-corrosive pigments.Due to zinc phosphate free nature Fontecryl SC-EF 50 is more environmentally friendly than traditional water-borne corrosion prevention paints Can be used as a single-coat paint that forms a tight film...
Grafotherm Line, a one-component water-borne anti-condensation coating for line application.Excellent moisture absorbing and evaporation properties Prevents from condensation and dripping water, insulates from heat (λ = 0.085 W/mK) Forms very elastic and strong film Recommended to be used for steel roofing sheets for interior and...
£2,815.43 (incl. VAT)
£2,346.19 (ex. VAT)
Tikkurila Temacoat 50 is a two-component resin modified epoxy paint containing anti-corrosive pigments that adheres well to steel, zinc and aluminium surfaces and can be used as a single-coat paint.High film-building properties. Good resistance to mechanical, chemical and climatic stress. Forms a durable and flexible surface. Low VOC...
£303.97 (incl. VAT)
£253.31 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
