Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 4 products.
Carboline Carboguard E 19 Primer is a two-component epoxy polyamide primer containing zinc phosphate. A versatile epoxy primer with excellent resistance to salts, water and alkalies, with very good resistance to mild acids and solvents.Excellent corrosion resistance Cured film is tough and abrasion resistant Used 40% diluted as a...
£110.70 (incl. VAT)
£92.25 (ex. VAT)
Please contact our technical team on 0113 2455450 (option 2) to order this product. Carboline Polyclad 777 Slow-Set is a two-component, solvent-free aromatic polyurethane, ASTM D16 Type V. A high performance 100% solids structural polyurethane coating designed to provide superior corrosion protection for steel, ductile iron, and concrete...
£0.00 (incl. VAT)
£0.00 (ex. VAT)
Axalta ViterShield SPF Epoxy Primer/Finish is a two-pack epoxy, mid-sheen primer/finish for blast cleaned steelwork.Low temperature curing (down to 0ºC) and low tendency to bloom Use as an anticorrosive primer/undercoat or primer/finish for general structural steelwork High build airless spray capability Good resistance to undercutting...
£52.13 (incl. VAT)
£43.44 (ex. VAT)
Axalta ViterCoat GF Primer is a two pack epoxy primer for the ACE market.Fast air drying or force dried with good corrosion resistance Designed for overcoating with a range of standard Axalta Coating Systems topcoats Suitable for application by airless or conventional spray Excellent adhesion to thoroughly degreased mild steel, blast...
£0.00 (incl. VAT)
£0.00 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
