Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Our repairing primers and additives come courtesy of Remmers and Sika. There are bond promoters, rust inhibitors, binders, corrosion protection, salt inhibitors, strengtheners, modifiers, special fillers and quartz! All intended to strengthen and reinforce the attributes of your systems. If you have a project that needs a specific requirement in abundance, then an additive can assure you that.
When choosing a primer, be sure to check the Product Data Sheet of both the primer and the system you plan to use after. Most products are very specific about which primer should be used in conjunction and the wrong choice of primer can result in chemicals being mixed that are not best suited. Usually a manufacturer will suggest their own primer, but this is with good reason as the two will have been designed with each other in mind.
If you are unsure at all which product would suit your needs best, please give our Technical Support Team a call on 0113 245 5450, email us on [email protected] or get in touch on one of our social media outlets where our web team will help as best as they can.
There are 33 products.
Active filters
Sika Primer 3N is a universal, one component, solvent primer based on epoxy-polyurethane which should be used on porous substrates prior to the application of Sikabond Adhesives.Universal Primer Evaporates quickly Easy to apply
£81.43 (incl. VAT)
£67.86 (ex. VAT)
SikaTop Armatec 110 EpoCem is a bonding primer and reinforcement corrosion protection. It is a cementitious, epoxy resin compensated three component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. Features and Benefits: Contains EpoCem technology - improved bonding agent Extended...
£562.01 (incl. VAT)
£468.34 (ex. VAT)
Heskins Primer seals porous surfaces such as wood, concrete or stone prior to application of Heskins` anti-slip tapes, preventing moisture from degrading the adhesive. The surface primer also greatly helps to create an extra bond on other surfaces.Typical coverage - 5m² per litre. Available in water-based or solventMore Information...
£16.60 (incl. VAT)
£13.83 (ex. VAT)
Sikaflex-406 KC Booster is used with Sikaflex 406 KC to enable rapid and homogeneous curing throughout the entire sealant.Must be used with Sikaflex-406 KC Énables rapid release of areas to traffic, recessed and broadcast joints can be opened to traffic after only 3 hours (dependent on temperature) High joint movement capability of...
£27.82 (incl. VAT)
£23.18 (ex. VAT)
Tremco CS175 Epoxy Primer for Porous Substrates is a two part water based epoxy primer. CS175 provides a breathable sealer for calcium sulphate screeds. Additionally, it is suitable for priming new and existing cementitious screeds, concrete, brick and blockwork.May be used as a low viscosity primer for epoxy paint coatings on prepared...
£77.10 (incl. VAT)
£64.25 (ex. VAT)
Tremco CS190 Gritty Primer is a ready mixed, ready to use rapid drying primer that can be used on both absorbent and non-absorbent substrates. CS190 provides a textured surface which gives an excellent bonding surface for self-levelling/smoothing compounds and screeds.Suitable for use on a wide range of substrates including existing...
£56.75 (incl. VAT)
£47.29 (ex. VAT)
Fosroc Auracast 200 is a cement admixture formulated using a unique combination of the latest generation of polycarboxylate polymers which act synergistically to outperform conventional superplasticisers. Specifically developed for the precast concrete industry coupling superior high range water reducing capabilities and excellent dispersion...
Fosroc Nitoprime 33 is the recommended primer for the Fosroc Cemtop range of cementitious self-levelling floor toppings applied to concrete and cementitious substrates. It is a water-based primer which seals the substrate preventing the release of air by the concrete that could form bubbles in the flooring compound. In addition, it “wets” the...
£107.27 (incl. VAT)
£89.39 (ex. VAT)
Fosroc Nitoseal MS2 Primer is a two-pack primer for use in joints subjected to high movement or where joints will be intermittently or permanently immersed during service. Suitable for use before the application of products in the Fosroc Nitoseal range including Fosroc Nitoseal MS300, Fosroc Nitoseal MS600, Fosroc Nitoseal MS60 and Fosroc...
£118.75 (incl. VAT)
£98.96 (ex. VAT)
Fosroc Primer P20 is a one-pack primer for concrete joint faces used in conjunction with Fosroc Sealants. Suitable for use on joint faces in concrete roads, concrete runways and hard standings before the application of selected Fosroc products. Please see the Product Data Sheet for the relevant base product for application and mixing details...
£224.14 (incl. VAT)
£186.78 (ex. VAT)
Fosroc Conplast UW is an underwater concrete admixture used to minimise washout of concrete placed underwater. When added to concrete, Conplast UW produces a gel in the water phase which surrounds the cement particles and other fine components of the concrete mix and protects them from excessive washout both during placement and once the...
£235.42 (incl. VAT)
£196.18 (ex. VAT)
Fosroc Nitobond HAR is a single component polymer emulsion and recommended primer for the Renderoc cementitious repair systems.Good vertical and overhead grab properties Supplied ready for use when used as a bonding primerNitobond HAR is not designed for use as a curing membrane. For applications providing a curing membrane and...
£154.56 (incl. VAT)
£128.80 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
