The website will be offline from 7:30pm for maintenance
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 18 products.
Active filters
Britannia One Pack Etch Primer is a solvent-based primer which enhances adhesion properties to difficult surfaces.For use on aluminium, copper and galvanised steel surfaces External use Up to 12 months shelf life Can be brush, roller or spray applied Solvent based Coverage 10–13m2/lt
£37.26 (incl. VAT)
£31.05 (ex. VAT)
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black. More Information Delivery Info
£104.96 (incl. VAT)
£87.47 (ex. VAT)
Nu-Steel SP Etch Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems.First coat of the Nu-Steel System Provides first class adhesion to properly prepared surfacesMore Information Delivery Info
£112.95 (incl. VAT)
£94.13 (ex. VAT)
Primes and prepares galvanised surfaces for painting.Overcoat the same day Essential for good adhesion Quick and easy to use Apply by brushCoverage Calculator More Information Delivery Info
£39.00 (incl. VAT)
£32.50 (ex. VAT)
Nu-Steel TP Etch Primer is a two pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems.High performance product giving protection up to 8 years For use on properly prepared steel such as parapet/guard rails and architectural steelwork. Part of the part of the Nu-Steel TP SystemMore...
£452.70 (incl. VAT)
£377.25 (ex. VAT)
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
£378.20 (incl. VAT)
£315.17 (ex. VAT)
International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.
£96.25 (incl. VAT)
£80.21 (ex. VAT)
HMG HB48 Primer is an alkyd based, quick drying primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate.Suitable for structural steelwork, chassis, steel fabrication, mild steel, shot blasted steel, aluminium & galvanised steel Easy to apply without fear of...
£47.08 (incl. VAT)
£39.23 (ex. VAT)
HMG Chromate Free Etch Primer is a quick drying chromate free etch primer providing good anti corrosive properties and excellent adhesion to ferrous and non-ferrous metals. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator when used as a wash primer:2-Pack System DetailsBase...
£100.68 (incl. VAT)
£83.90 (ex. VAT)
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environmentsFast cure and low-temperature cure hardeners available - click to...
£327.16 (incl. VAT)
£272.63 (ex. VAT)
A two-component resin modified epoxy paint containing anti-corrosive pigments that can be applied at sub-zero temperatures as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress.Recommended for building frameworks, tubular bridges, conveyors and other steelwork and equipment Adheres well to...
£510.80 (incl. VAT)
£425.67 (ex. VAT)
Tikkurila Temacoat RM 40, a two-component, resin modified epoxy primer/topcoat that can be used as a single-coat system.Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress Suitable for concrete surfaces and has a CE marking Can be used on steel structures in wet environments, e.g. inside...
£59.89 (incl. VAT)
£49.91 (ex. VAT)
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
