- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Floor Primers
Watco Epoxicote High Build Primer
Epoxy resin primer for preparing bare concrete for painting, overcoating with Epoxicote High Build. Primes hard, smooth concrete ready for painting One coat application – quick and easy to apply Low odour, two-part, water-based epoxy resin Seals porous concrete to prevent bubbling in new paint Note: While great care is taken with...
Mapei Mapecoat I 600 W
Specifically formulated for priming surfaces before applying Mapefloor I 500 W when used to form self-levelling, vapour-permeable epoxy coatings (Mapefloor System 53) and Mapefloor Urban System. Typical application examples: Primer for Mapefloor Urban System Primer for Mapefloor I 500 W (Mapefloor System 53) For professional use only...
Mapei Ultratop Base Coat
One-component acrylic formulation in water dispersion used as a base coat before applying protective finishes on Ultratop, Ultratop Living and Ultratop Loft. Supplied ready to use; do not dilute before use Applied using a suitable wax mop or a short-pile roller Good consumption rate (50-80 g/m²) depending on the porosity and absorption of...
Mapei Mapecoat TNS Primer EPW
Two-component epoxy primer in water dispersion, recommended for use with products from the Mapecoat TNS, PU Sealer 750, PU 700 SL, PU 800 SL FR and PU 200 Finish line. Adhesion promoter for: Absorbent, porous cementitious substrates Existing playing surfaces Mapecomfort elastic mat Primer for: Products from the Mapecoat TNS line...
Ronacrete RonaFloor Epoxy Primer
Solvent-free epoxy resin primer for adhesion to dry concrete and polymer modified screeds. Use before application of RonaFloor epoxy floorings, for excellent adhesion and minimal pin holing from porous substrates Good adhesion to prepared concrete and polymer screeds >2.5N/mm² bond strength to concrete Apply by medium nap lambswool...
Ardex DPM 1 C One Coat Surface Damp Proof Membrane
1 coat damp-proof epoxy resin; After hardening, produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength - excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids. One coat solvent free, low viscosity, two component epoxy resin Protects the final...
Ardex P 51 Concentrated Water-Based Primer
Ardex P 51 is a water-based primer used to prepare dry internal floors, walls and ceilings to receive cement-based mortars (levelling compounds, tile adhesives, screeds) as well as plaster based materials, improving adhesion as a bonding agent and retarding the wetting of the substrate by the applied materials. Easy to use, dilute as...
Ardex R3E Solvent Free Epoxy Primer
Ardex R3E forms a primer/bonding layer on most dry substrates, especially smooth or dense surfaces in internal and external situations. A two component, solvent free, epoxy resin for use on sound concrete, cementitious surfaces, calcium sulphate based screeds and smoothing compounds. Low odour Suitable for use on damp cementitious floors...
Flowcrete Hydraseal DPM
2-component epoxy resin in red, yellow or natural, moisture barrier for cementitious substrates. Ideal for damp concrete surfaces where conventional primers fail. CE certified and solvent-free, ensuring environmental safety and minimal odour. Restricted to professional use.
Flowcrete Flowprime
2-component low viscosity epoxy resin primer for cementitious substrates, in a transparent finish. Ideal for priming concrete and screeds before overcoating with resin toppings. Solvent and Nonyl Phenol-free, ensuring a practically odourless application. Accredited to EN 13813 for high performance and quality. Restricted to professional...
Weber Weberfloor DPM Pro
Two-component epoxy-based damp proof membrane. For concrete and cement-based screeds. Suppresses residual moisture.
Ronacrete RonaDeck Resin Bonded Steel Primer
Single component polyurethane primer for steel surfaces. Available in silver grey. Designed for prepared steel, including shot-blasted and degreased surfaces. Fast curing, enabling early application of RonaDeck Resin Bonded Surfacing. Excellent adhesion, forming a reliable bond with steel substrates. Suitable for professional and...
Ronacrete RonaDeck Resin Bonded GP Primer
Two-component, solvent-free, clear epoxy primer for surface damp or porous concrete and screeds. Ideal for concrete, screeds, and porous substrates; enhances adhesion and prevents pinholing and blistering. Moisture-tolerant; suitable for surface damp conditions, ensuring reliable application performance. Low odour and solvent-free...
Flowcrete Flowfresh Primer
Three-component water-based polyurethane primer suitable for priming concrete and cementitious substrates. Designed for use on concrete and screeds prior to applying Flowfresh or Flowcrete polyurethane concrete toppings. Suitable for porous floors and high-humidity environments (up to 97% RH). Requires a second coat for porous floors....
Flowcrete Flowfast Standard Primer
Clear two-component low-viscosity methyl methacrylate (MMA) primer for concrete and cementitious substrates. Suitable for priming concrete, screeds, and wood, prior to overcoating with resin toppings. Quick curing time of 30 mins.
Flowcrete Flowfast Asphalt Primer
Clear two-component low-viscosity primer for asphalt and bitumen substrates. For priming asphalt/bitumen screeds before overcoating with resin toppings. Fast-curing. Solvent-free. Eggshell finish.
Flowcrete Peran ESD Primer
Black, two-component epoxy-based primer. Designed for dispersing static electricity. Ideal for use on most ESD systems. Solvent-free, practically odourless. Professional use only.
Flowcrete Aqualock OneCoat Surface Damp Proof Membrane
2-component epoxy-based damp proof membrane available in Slate Grey. Effective moisture suppressant on concrete substrates with relative humidity up to 97%. Recommended for underfloor heating systems (up to 27°C). Solvent-free and low-odour. Guaranteed long-lasting protection against moisture-related damage. Accredited to EN standards...
Flowcrete Flowfast Damp Primer
Two-component methyl methacrylate (MMA) primer designed for damp cementitious substrates. Ensures strong adhesion on high humidity substrates. Fast-curing within 60 minutes. Professional use only.
Flowcrete Flowchem VE Primer
Three-component, shrinkage-compensated, vinyl ester-based primer. Gloss finish, designed for priming concrete and other approved porous surfaces. For clean, dust-free, porous substrates with a pull-off strength of at least 1.5 MPa. Rapid hardening. Excellent adhesion.
Flowcrete PHS Penetrating Hardening System
Two-component, solvent-free, epoxy-based primer available in clear finish. Used to reinforce old porous concrete and as an injection plastic. Suitable for industrial use, particularly in commercial and healthcare environments. Solvent and nonylphenol-free, low odour, and minimal VOC emissions. Guaranteed to meet BS8204 BRE test category...
Flowcrete Flowchem VE Metal Primer
Three-component rapid-hardening primer, based on rubber-modified vinyl ester. For carbon steel, stainless steel, and aluminium surfaces. Ideal for industrial metal surfaces to prepare for further resin application. Features a shrinkage-compensated formula for durability and adhesion.
Flowcrete Flowfast Ceramic/Metal Primer
Two-component, low-viscosity clear methyl methacrylate (MMA) primer. For metal and ceramic tile substrates. Excellent adhesion. Rapid curing time - approximately 30 minutes at 20°C. Can be applied to surface-dry substrates. For professional use.
Sikafloor 220 W Conductive
2 part, water dispersed, epoxy resin primer with high electrostatic conductivity. Must be applied as a primer underneath all Sikafloor conductive wearing courses on concrete and cementitious screeds for different types of industrial use. Highly electrostatically conductive Easy application Economical in use Solvent free
RSL Resuprime ESD
Designed to be applied prior to the use of Resuflor SL ESD, Resustat SL23, FasTop TG ESD or Resuflor Terrazzo. It is a low viscosity epoxy primer with conductive fillers. Conductive with very low electrical resistance Good adhesion Low odour High solids Easy to apply Formerly known as Resustat CP and Resustat Primer
Tikkurila Temafloor 310 ESD
A solvent-borne, two-component, electrically conductive epoxy primer used for priming of Temafloor 4000 ESD grinding screed. Approx. 70% volume solids. At 23℃: Dust dry after 8 hours Recoatable after 24–48 hours Fully cured in 7 days
Watco 4 Hour Epoxy Primer
A 2-component primer for porous, bare, concrete, sand and cement screeds, bricks and blockwork that is ready to be over coated in only 4 hours. For priming bare, porous, or open textured surfaces prior to applying a high build floor finish Ready to be over coated in only 4 hours Virtually solvent free two pack epoxy resin – safe for use...
Flowcrete Flowprime LE100
Two-component solvent-free epoxy primer designed for sealing concrete substrates and controlling VOC emissions. Suitable for cementitious surfaces, asphalt coatings, and substrates requiring low VOC emissions; also functions as a barrier over existing coatings when overlaid with a suitable system. Low odour and compliant with...
RSL Resuprime OT
2-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. Easy application Application onto substrates with engineering oil contamination Excellent adhesion Low odour High solids Formerly known as R.S. Oil Tolerant Primer
Mapei Primer CC 200
A special primer specifically formulated for oil contaminated cementitious surfaces and it is applied (after the substrate has been adequately prepared) to improve the adhesion of protective epoxy and polyurethane resin coatings on concrete industrial floor and cementitious substrates in general. Some application examples: Adhesion promoter...
Watco Solvent Based Safety Tape Primer
Increases the adhesion of self-adhesive tapes and treads. Binds weak surfaces so that floor tapes will stick Ready in 30 minutes For use on porous dusty surfaces One coat brush application Water-based version also available
Remmers Epoxy BS 2000 Transparent
Two-component, water-based impregnation agent and primer available in a yellowish clear finish. Suitable for use on mineral substrates, including concrete, cement screed, anhydrite screed, and magnesite screed. Excellent adhesion properties with high water vapour diffusion capability. Ideal for priming in Remmers water vapour diffusion...
Remmers Epoxy BS 2000
Two-component, water-based pigmented primer with excellent adhesion, in 5 grey shades. Suitable for use on non-absorbent, weakly absorbent, and existing coated surfaces, including concrete, cement screed, and anhydrite screed. Water vapour diffusion-capable, making it ideal for moisture-sensitive applications. Free from plasticisers,...