A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals.
Blackfriar Anti-Slip Step Paint
Blackfriar Anti-Slip Step Paint is specially designed for steps, contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish.
Blackfriar Anti-Slip Step Paint is specially designed for steps, contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish – for interior and exterior brick and concrete steps.
- Tough and durable
- Improves grip underfoot on most surfaces
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 14m² per litre
- Touch Dry
- 4 Hours
Be the first to ask a question about this product!
Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and it will provide a heavily textured finish incorporating an anti-slip aggregate which is dispersed within the material upon application. Each pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface.
Anti-slip marine coating specially made for the decks of sea faring vessels which is a ready mixed, aggregated coating which provides a rough anti-slip finish when dry to provide extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas.
Blackfriar Professional Anti-Slip Floor Paint is suitable for concrete, cement, brickwork, masonry, wood, stone, and metal surfaces: Excellent slip-resistance Tough and durable coating Resists grease and oil Resists light foot traffic For interior/exterior use Ideal for light industrial, commercial and domestic floors Economic and...
Remmers Epoxy SIC Color is a textured, dissipative, hard grain coating that is conductive, provides slip-resistance, withstands mechanical/chemical loads and is physiologically harmless after curing.
Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
703 MMA Flexible Anti-Slip Coating is a fast curing, flexible coating for interior or exterior tarmac and asphalt surfaces enhanced by the incorporation of slip resistant aggregates premixed into the resin.
Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
Ennis-Flint MMAXGRIP PRMX 65 is a MMA-based coating that was developed specifically for application to public main roads and side streets as well as other traffic zones. Its special properties make MMAXGRIP PRMX 65 particularly suitable for surfaces where coloured road markings are required on main roads and side streets in urban areas and elsewhere.
Anglo Floor Paint Slip Resistant Grade dust proofs, seals and transforms drab concrete floors. It is easy to apply and dries quickly to a tough, mid-gloss finish and is ideal for slippery concrete floors, the anti slip aggregate is pre-blended with the paint to produce a more evenly textured finish.
Smartkote Protectakote WB Smooth is a water-based, smooth polyurethane coating. This water-based solvent-free formulation is weather resistant, has a low odour, and is non-flammable for both interior and exterior applications. It’s enhanced with polyurethane for ultimate toughness, with excellent resistance to abrasion, chemicals and solvents....
Smartkote Protectakote WB is a water-based anti-slip polyurethane coating. Its textured finish is ideal to create safe, anti-slip walkways, steps and ramps on light industrial and commercial floors, for both interior and exterior applications. This water-based solvent-free formulation is weather resistant, has a low odour, and is...
Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out. Ideal for metal bridge decks, loading bays, pedestrian walkways, ramps and car parks, footpaths, roads and pavements, driveways,...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...