Rust-Oleum Pre-Paint Cleaner cleans and degreases surfaces before painting. It is suitable for all types of surfaces and is not flammable, not corrosive and nearly odourless. Rust-Oleum Pre-Paint Cleaner is for all types of surfaces including floors, walls, doors, windows, metal, etc. it cleans, degreases and also removes nicotine stains - making the surface anti-static to prevent adhesion of dust prior to painting and does not foam.

This concentrated multi-surface pre-paint cleaner;

• Effortlessly removes all organic and inorganic pollution
• No further rinsing is needed after wiping the surface; saves time (Tested by COT independent technical test institute)
• Makes surface anti-static to prevent dust and dirt adhesion
• Non-foaming, biodegradable formulation (certified by TNO test institute)

Features & Benefits

• Multi-surface; metal, wood, window/door frames, floors and more
• Concentrated formula, can be diluted 1:50
• Removes all organic and inorganic pollution
• Anti-static effect prevents dust and dirt adhesion

Dilution: Because of its concentrated composition, Rust-Oleum Pre-Paint Cleaner is very economical in use. Depending on the degree of contamination, the product should be diluted in a ratio of between 1:10 and 1:100.

• 1:10 ovens, motors, extremely dirty floors
• 1:20 kitchens, machines, gas stoves, garden furniture
• 1:50 paintwork, nicotine stains
• 1:100 windows, mirrors, sun-beds etc.

Directions for Use
Shake well before use. Scrape off grease, oil, dirt and other pollution as much as possible. Dilute Rust-Oleum Pre-Paint Cleaner to the required mixture and apply on the surface. Rub with a brush or white nylon pad and allow to work in for several minutes if necessary. Then wipe thoroughly with a damp sponge or cloth. With stubborn soiling repeat the treatment or leave to work in longer, possibly with a higher concentration.

Application Conditions
Temperature of air, substrate and material between 5 and 35°C.