Rust-Oleum Mathys Dacfill Waterproofing is a watertight, water-based liquid membrane for roofs: Forms a lasting elastic coat without joints or seams on sloping roofs (min. 5% slope) Has been tested and independently approved for asbestos encapsulation which makes it an excellent alternative to asbestos sheet replacement saving cost, time...
Rust-Oleum Mathys Coating PRT is ideal as a topcoat on Rust-Oleum Mathys Dacfill Waterproofing for improved resistance to continuous water immersion or on Rust-Oleum Mathys Noxyde to minimise dirt retention
Coating of inner and outer walls that can be exposed to high humidity, i.e. bathrooms, kitchens, etc. or as a topcoat on Dacfill (improved resistance against stagnating water and less dirt retention) or on Noxyde (less dirt retention).
- Plastified solvent-based acrylic, 1-component
- Flexible, long lasting finish
- Low dirt retention
- Solvent-based, plastified acrylic
- For humid areas
- Long-lasting and flexible
- Density: 1,12
- Gloss Level: Satin
- Solids content in volume: 42 %
- Solids Content in weight: 48 %
Drying Times At 20°C/RH 50%
- Touch dry: 3 hours
- Dry to handle: 4 hours
- Dry to recoat: 24 hours
- Fully cured: 24 hours
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Further information can be found on the product data sheet.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 4 Hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 24 Hours
- Solids by Volume
- 42 %
- 481 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 3 Hours
- Recommended Dry Film Thickness
- 60 µm
- Recommended Wet Film Thickness
- 140 µm
- UN Number
- 7 m²/l
Be the first to ask a question about this product!
Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 15 years of protection with excellent waterproofing and elasticity. Features and Benefits Unrivalled corrosion protection and waterproofing Approved for corrosion class C5-M high (ISO 12944)...