Fosroc Nitodek FS Wearcoat is a three component product comprising resin, filler and hardener. It cures rapidly to give high impact resistance and low-temperature flexibility.
Combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable for balconies, car park decks, ramps and turning circles.
Combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible
Bespoke systems can be produced from the suite of system products to suit specific situations and performance requirements
Methacrylate resin provides an impact resistant flexible wear resistant layer
Ideal for:
Balconies
Car Park Decks
Ramps
Turning Circles
Fosroc Nitodek FS System
The Nitodek FS System is a high performance, multi-layer, trafficable, waterproofing system that provides a seamless, highly resistant, elastomeric, anti-slip finish.
Typically polyurethane technology has been used to provide durability and flexibility, however the slow speed of curing in UK climates can be restrictive in projects requiring fast turnaround.
Fosroc’s Nitodek FS system is a hybrid system that combines MMA Technology with polyurethanes, the benefits being that the product is fast curing (at approximately 60 minutes per layer) as well as hard wearing and flexible.
Bespoke Nitodek FS systems can be produced from the suite of system products to suit specific situations and performance requirements; from balconies and walkways, to roof decks, podium decks, car park decks, factory floors and airport hangars.
Nitodek FS forms part of Fosroc’s comprehensive repair and protection offer.
Nitodek FS offers the following advantages:
Extremely short curing times
Outstanding impact resistance
Speed of application
Crack bridging
Easy to apply even at low temperatures down to 0oC
Should be mixed with Nitodek FS Hardener according to the advice given in the product data sheet. Dependent on the skill and experience of the user different application tools can be used such as comb or smooth trowel
Nitodek FS Wearcoat must be allowed to fully cure (1-3 hours dependant on temperature) before over-coating
25kg of Nitodek FS Wearcoat applied at 1.6kg/m2 per mm thickness will cover approximately 8m2 (2mm application)
Limitations
Should not be used below 5°C
Use in a well-ventilated area
Do not apply to wet or damp surfaces
Do not expose to direct sunlight
Nitodek FS Wearcoat must be stored separately from Nitodek FS Hardener
Nitodek FS Wearcoat Resin is flammable. No smoking. In the event of fire extinguish with foam or CO2 . Do not use water jet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Fosroc Nitodek FS Wearcoat Filler & Resin is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Fosroc Nitodek FS Fleece is a high performance polyester fabric with high strength and good stretch characteristics - used as part of the Nitodek FS system a hybrid fast curing trafficable waterproofing system that combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable...
Nitodek FS Hardener is a white free-flowing powder that when mixed with Nitodek FS resins (solvent-free, multi-component methacrylic resins) at the correct percentage by weight, rapidly hardens the resin. Nitodek FS Hardener’s active component is benzyl peroxide (also known as BPO).Part of the Nitodek FS system Fast setting allows for...
Nitodek FS Membrane Resin is pigmented to a beige colour to allow the applicator to ensure no gaps are left in coverage. The product cures to a permanently flexible finish which is highly tolerant of thermal movement in concrete.Part of the Nitodek FS system Applied over Nitodek FS PrimerMore Information Delivery Info
Nitodek FS Primer is a transparent, solvent-free, 2-component methacrylic resin that cures rapidly, even at low temperatures, on steel and new and existing concrete surfaces.Part of the Nitodek FS system Fast setting allows for quick over-coating Easy to apply Suitable for priming vertical and absorbent substrates Seamless Solvent...
Nitodek FS Topcoat is two component product comprising resin and hardener with good application properties, and therefore will not leave trowel marks.Part of the Nitodek FS system Applied over Nitodek FS Wearcoat Fast setting, with crack bridging properties Seamless, solvent-free, and easy to apply Can also be used with coloured flakes...