Rust-Oleum 8399 Hygienic Primer is a specially formulated hygienic primer for use with Rust-Oleum 8300 Hygienic Topcoat. As a system it protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Ideal for walls and ceilings. Very fast drying and recoatable with Rust-Oleum 8300...
Rust-Oleum 8300 Hygienic Topcoat
A single pack hygienic topcoat developed by Rust-Oleum, which protects walls and ceilings against mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture.
- Offers protection against mild chemical exposure, humidity and moisture
- Can be applied as low as -10°C
- Non-yellowing and resistant to frequent cleaning
- Very fast drying and recoating times
- Contains a biocide to protect the dried coating against fungal degradation
Rust-Oleum 8300 Hygienic Topcoat
Rust-Oleum 8300 Hygienic Topcoat is a single pack hygienic topcoat which protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture. For walls and ceilings.
Features & Benefits
- Fast drying and recoating time
- Can be applied as low as 0°C; ideal for refridgerated areas
- Non-yellowing and resistant to frequent cleaning
- Durable gloss finish
Rust-Oleum 8300 Hygienic Topcoat can be applied on surfaces primed with Rust-Oleum 8399 Hygienic Primer or well prepared previous coatings.
- Density: 1,18
- Gloss Level: Gloss
- Solids content in volume: 42 %
- Heat Resistance: 80°C (dry heat)
Drying Times At 20°C/RH 50%
- Touch dry: 2 hours (20°C), 4 hours (10°C), 30 minutes (30°C), 6 hours (0°C), 8 hours (-10°C)
- Dry to handle: 4 hours (20°C), 6 hours (10°C), 1 hour (30°C), 8 hours (0°C), 12 hours (-10°C)
- Dry to recoat: 6 hours (20°C), 12 hours (10°C), 2 hours (30°C), 16 hours (0°C), 24 hours (-10°C)
- Fully cured: 8 days (20°C), 12 days (10°C), 5 days (30°C)
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Cleaning Of Equpment/Spills
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 4 Hours
- Dry to Recoat (at 20°C)
- 6 Hours
- Fully Cured (at 20°C)
- 8 Days
- 12m² per litre
- Solids by Volume
- 42 %
- Heat Resistance (up-to)
- 80°C (dry heat)
- 458 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 2 hours
- UN Number
Be the first to ask a question about this product!
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment. Strong dilution...
Sherwin-Williams Macropoxy M630V2 (formerly known as Biogard M630V2) is a water-based, two-pack epoxy gloss finish for interior use only, recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel. Coverage...
The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations. Other associated products include; Sika Standard Drainage Membrane Sika Plaster Drainage Membrane Sika HD20...
Sika Drain 850 Geo is a heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums. Features and Benefits High drainage capacity High...
The Sika HD20 Membrane is a high-density polyethylene, high capacity cavity drainage membrane principally for use on floors, providing high water flow with a deep stud profile designed to resist blockages caused by lime deposits. Ideally suited by heavy duty use on floors, impermeable to water, gas and vapour, fast track installation, can be...
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray. Features and Benefits High adhesion and...
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures...
Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Wintergrade) ideal when extra protection against traffic and chemicals is needed. This versatile coating can also be used outdoors and in cold rooms and freezers. Overcoatable...
Sikagard 406 W is a single component white, waterborne acrylic resin based surface coating containing an organic in film preservative with a mat finish. Topcoat or standalone coating for: internal walls and ceilings for concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for...
Coo-Var Profloor Plus FH is a fast curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to allow the laying and recoating of a surface within the same working day. It is particularly valuable where rapid return to service is required, or where the economics of a contract require that two coats...
Coo-Var Profloor Plus Cold Cure is a low temperature curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to cure when the surface temperature is in the range 0 to 10°C. Coo-Var Profloor Plus Cold Cure is particularly valuable for applications at colder times of the year when the cure time of the...
Rust-Oleum Biosan Aqua Plus is a water-based 2-pack anti-bacterial topcoat for walls and ceilings where hygiene control is essential, like hospitals, kitchens, dairies, breweries, schools etc. Whilst offering exceptional abrasion resistance, it is also water dilutable, solvent free - almost odourless - and easy to clean. High build and...
Rust-Oleum Biosan Aqua Gloss is ideal for walls and woodwork where hygiene control is essential in low wear areas. Offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment. Decorative hygienic paint in gloss, satin or mat in almost any colour Good flow,...
Sikagard 405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish. Topcoat or stand alone coating for internal walls and ceilings - concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for pharmaceutical,...
Rust-Oleum Biosan Ultra is a 2 pack, solvent free, hygienic floor coating for areas where controlled hygienic conditions are of essential importance and where high durability and abrasion resistance is needed. Contains a biocide to protect the dried coating against fungal degradation Exceptional abrasion resistance Easy to clean...
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in...