Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements.
Nu-Steel SP Anti-Corrosive Primer/Undercoat is the perfect primer for external metal structures that are exposed to the elements. Weathering, damp and even oxygen in the air continually eat away at uncoated metals. This primer, available in white or red oxide colours, will provide the required basecoat for structures that face a particular threat to corrosion.
Product Use in the Workplace
Metal fence - Although built as a barrier, it is fairly common for fences to be touched or climbed on. I think we all have some fence-climbing stories from our childhood to tell. It's therefore important that the fence is kept in top condition and free from rust and flaking that can cause discomfort or harm to individuals.
Shipping container - Shipping goods all over the world means these structures are not only out all year round but also spend much time at sea, exposed to the full battle of the elements eroding away at the metal.
Storage facility - Protecting the items inside the facility is of prime importance. No storage facility can offer full protection if water and moisture are eating away at the structure, which will only serve to increase the potential of damaged goods inside.
Features & Benefits
High performance phosphate primer and undercoat.
Available in Grey and Red Oxide colours.
First class adhesion to properly prepared surfaces.
8-10m²/Litre average coverage rate.
12-month shelf life.
Preparation
First coat of the Nu-Steel SP System. Ensure surfaces to be treated are clean, free from contamination and dry. Previously coated surfaces should be abraded.
Application
By brush/roller or spray. All equipment should be cleaned with T2 Thinners.
Store away from direct sunlight and sources of heat. Protect from frost.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes, stacks and equipment operating up to 450°F (232°C).
Top Features
Temperature resistance up to 232°C
Excellent resistance to thermal shock...
PPG NovaGuard 4701 is a two-part glass flake vinylester primer for concrete and steel as a holding primer for Novaguard 4801.
Suitable for service temperature >80°C (176°F) when overcoated with NOVAGUARD 4801 dependent on the actual environment.
Mixing ratio by volume: base to catalyst 98:2
Rust-Oleum CombiColor Multi-Surface Paint is a solvent-based, adhesive primer and topcoat in one based on Alkyd binder.
For internal/external use
Quick drying
Apply to many surfaces
Available in 400+ colours
See below for available colours, finishes and sizes
Part of the CombiColor range
Jotun Jotamastic 90 Alu B15 WG is a 'Wintergrade' version of Jotun Jotamastic 90 Alu B15 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids, high build product.
Jotun Hardtop Smart Pack is a two component chemically curing modified acrylic coating that does not contain isocyanates. It has a gloss finish with good gloss retention and can be used direct to metal. It has a 1:1 mixing ratio for easy use and reduced wastage and is specially designed for application with brush and roller.
A high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe.
Top Features
Fast curing rate increases throughput
Excellent abrasion resistance
Compliant with AWWA C222
Compliant with EN 10290
This product is available as POA. Click here to email us...
A rust preventing coating that is the solvent-based version of Rust-Oleum Mathys Noxyde that can be applied by brush, roller or spray in cold temperatures down to 0°C or on damp surfaces by brush, roller or spray.
Sherwin-Williams Dura-Plate 301K is a solvent-free, surface and humidity tolerant two-pack modified epoxy that can be applied without dew point restrictions and over wet steel surfaces. It is an anticorrosive coating for long service life steel protection that can be used for both immersion and above the waterline service in marine, offshore, construction...
Aquazinga, a two-pack anti-corrosion system providing cathodic protection to ferrous metals, and can be used as an alternative to hot-dip galvanisation or metallisation. Designed to withstand high temperatures (up to 600°C) and corrosive environments and severe conditions such as ballast tanks, turbine exhausts and high-heat pipelines....
Jotun Marathon 1000 GF is a two component polyamine cured epoxy coating. It is a high build, solvent free, glass flake reinforced product. It has very good impact and abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in...
Cromadex 890 Two Pack Non-Isocyanate Acrylic Primer Finish is a two pack gloss primer finish formulated without isocyanate helping to reduce health and safety concerns. The product contains zinc phosphate giving added corrosion resistance for greater durability, it is also high build making it suitable for application onto blasted steel. Available in a...
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.
An aluminium-pigmented high solids mastic with excellent barrier and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading.
Top Features
Suitable as a topcoat for most tightly adhering existing coatings
Contains 9 % aluminium by weight in the dry film
Can be used as a...
A heavy duty, high build coating for protection of steel in corrosive environments. Carbomastic 18 FC Metallic is excellent for use at low temperatures.
Top Features
Excellent immersion performance in water.
Suitable as a rust preventing coating in ballast tanks.
Ideal for areas prone to condensation.
Very good abrasion resistance.
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.
