Tor HB Micaceous Iron Oxide applies to structural steelwork for protection against corrosion, on structures such as:
Cranes
Transmission towers
Bridges
Gantries
Tanks
And many more
The high build coating is applied by airless spray (see below for details) or brush, though brush application will only achieve 45 to 70 microns dry film thickness, and requires approx. 16 hours to dry before overcoating (at 20°C). Steel surfaces should be suitably prepared and primed with Tor QD HB Phosphate Primer (AK636) or Tor HB Phosphate Primer (AK623).
Features & Benefits
Corrosion protection on structural steelwork
Ideal for structures such as cranes, bridges, tanks
Apply by spray or brush
Brush application will only achieve 45 to 70 microns dry film thickness
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor HB Micaceous Iron Oxide is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Tor QD High Build Phosphate Primer, a quick drying high build anti-corrosive primer for blast cleaned or mechanically cleaned mild steel. Applied by spraying, the primer is touch dry in 1 hour and hard dry in 4 hours.Anti-corrosion protection for cleaned mild steel An alkyd resin binder with zinc phosphate anti-corrosive pigment, together...
A single pack high build primer for blast/manually cleaned steel. An excellent lead and chromate-free anticorrosive.Protective primer for steel A urethane alkyd binder with zinc phosphate anti-corrosive, together with inert inorganic pigments and thinned with low aromatic white spirit Good coverage - 6.45 square metres per litre Applies...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...