"

Jotun Steelmaster 60WB

Jotun Steelmaster 60WB View larger
Typical Coverage (per coat)1.4m² per litre (typical)
Touch Dry2 hours
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Steelmaster 60WB is a one component waterborne acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Read Full Description

More details

£130.52 + VAT

Jotun Steelmaster 60WB is a one component waterborne acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Jotun Steelmaster 60WB is specially designed as passive fire protection for steel constructions. Suitable for structural steel to be exposed to a wide range of corrosive environments up to high as a part of a complete system.

Approvals and certificates

  • BS 476 (30, 45, 60 minutes)

Additional certificates and approvals may be available on request.

Features & Benefits

  • Best loadings for beams and columns
  • Low VOC, water-borne
  • Single coat application for a majority of 60 minute steel sections
  • High volume solids
  • Low odour
  • Tested to BS 476 (20 and 21) 
  • Low environmental impact

Ready to use, easy spray application
Steelmaster 60WB is applied using airless spray, roller and brush for touchup only. For the full guidance notes download the Steelmaster product application guide.

IMPORTANT: The information displayed on this webiste for this product should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary prior to purchase and use.

Send us your question

Question

How many years protection will it give in a indoor enviroment

frank from glasgow (scotland) - 07/10/16

Answer

Jotun Steelmaster 60WB itself does not offer any corrosion protection. However, when used with the correct primer/topcoat combination you can achieve up to 15 years expected service life from the system as outlined in ISO 12944-2.

For an internal C3 environment, a suitable primer and Steelmaster 60WB alone should give the required protection. If Steelmaster 60WB is to be left exposed and not clad or boarded in, a suitable topcoat should be used to finish the system to prolong the service life and achieve the 15 year + durability.

is it best to erect the steelwork (primed) then spray the fireproof paint after.?

richard cartlidge from stoke on trent (england) - 09/07/16

Yes it is. Ensure the building is at a stage where the steels are protected from the elements, dry and internal before applying Jotun Steelmaster 60WB

Jotun Pilot QD Primer is a compatible primer and often used under Steelmaster 60WB on bare, prepared mild steel sections. Jotun Pioner Topcoat is often used as a compatible finish if required.

Will Jotun Steelmaster 60WB be ok to use on ducting for fire protection?

Simon glover from Nottingham (Notts ) - 14/10/15

No, Jotun Steelmaster 60WB is for structural steel members in a building. Duct work is normally thin galvanised metal sheet rolled up to form the ducting tubes and is too thin to protect with an intumescent paint of this kind.

Will Jotun Steelmaster 60WB be ok to use on ducting for fire protection?

Simon glover from Nottingham (Notts ) - 14/10/15

No, Jotun Steelmaster 60WB is for structural steel members in a building. Duct work is normally thin galvanised metal sheet rolled up to form the ducting tubes and is too thin to protect with an intumescent paint of this kind.

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Steelmaster 60WB Brochure

Download

Steelmaster 60WB TDS

Download

Steelmaster 60WB MSDS

Download

Steelmaster 60WB Application Guide

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.