Instarmac UltraCrete QC6 Surface Reinstatement Concrete is a non-shrink concrete designed for the surface reinstatement of ‘picture frames’ or fillets around access covers and surface areas around street furniture.
Instarmac UltraCrete QC6 Surface Reinstatement Concrete
QC6 is a non-shrink concrete designed for the surface reinstatement of ‘picture frames’ of fillets around access covers and surface areas around street furniture. This shrinkage compensated reinstatement concrete has an excellent workability and sets in just 15 minutes thus difficult to deface, improving public image and limiting asset liability.
QC6 a non–shrink concrete designed for the surface reinstatement of ‘picture frames’ or fillets around street ironwork and general repairs to roads and pathways, concrete drives, pavements and surface areas surrounding street furniture. Ideal for reinstatements in town centres and housing estates, where the use of barriers and traffic cones can be eliminated and defects caused by damage or vandalism can be avoided.
QC6 is supplied pre-blended in 25kg bags and tubs, containing special cements and a 6mm graded aggregate. The product requires only the addition of water to form a high strength rapid setting concrete, which, when set, dries to match most existing concrete surfaces. It can be applied from depths of 12mm to 100mm, depending on application. QC6 should not be used at temperatures below 5°C during application or initial set.
Good concrete practice should always be observed to enable the mix to be placed into position within 4 minutes. It is essential that all edges should be saw cut to a minimum depth of 12mm, feather edging is not recommended. All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to promote bond and prevent shrinkage, remove ponded water before applying the product.
QC6 can be mixed with a forced action mixer or by hand with an appropriate tool.
Further details on preparation and mixing can be found in the product data sheet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Instarmac UltraCrete QC6 Surface Reinstatement Concrete is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutesCoverage Calculator
£1,296.20 (incl. VAT)
£1,080.17 (ex. VAT)
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation.HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensatedMore Information Delivery Info
£1,246.93 (incl. VAT)
£1,039.11 (ex. VAT)
Instarmac UltraCrete Flowcon Self-Compacting Concrete is a high specification C40 concrete in a bag, ideal for applications with limited site access where bulk concrete cannot be delivered.Easily transportable Flowable Pre-blended cement for a consistent mix High compressive strength 55N/mm² Please note: This product is subject to a...
£645.26 (incl. VAT)
£537.72 (ex. VAT)
Instarmac UltraCrete FTC (Fast Track Concrete) is a fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks.Shrinkage compensated High compressive strength 66N/mm² Foot traffic: 2 hours Pre-blended, just add waterMore Information Delivery Info
£1,282.00 (incl. VAT)
£1,068.33 (ex. VAT)
For the installation of light duty posts, fences and polesLight duty applications Rapid set: 15 minutes Pre-blended, just add water 25N/mm² compressive strength Please note: This product is subject to a minimum order quantity of 2 x pallet layers of 56 x 25kg bags (112 x 25kg bags in total)More Information Delivery Info
£487.02 (incl. VAT)
£405.85 (ex. VAT)
