Hydron Nu-Guard Tack Primer
Nu-Guard® Tack Primer gives you the base coat on which to apply the Nu-Guard AG System to non-porous or existing coatings.
- Exceptional adhesion to non-porous surfaces.
- Primer coat for the Nu-Guard AG System.
- Touch Dry from 3-4 hours.
- Water soluble.
- 12-month Shelf life.
Nu-Guard Tack Primer acts as a first coat of the Nu-Guard AG System.
Imagine you want to achieve something like the following:
You can achieve this with the Nu-Guard AG. This is where the Tack Primer is important; If you have an existing coating or a non-porous substrate, this Nu-Guard Tack Primer gives you the base coat on which to apply the anti graffiti coat on to.
It is useful for venues and structures which are constructed from non-porous substrate, such as glazed tile and metal.
The 12-month shelf life means you can store the coating in its original sealed container, for use on other projects.
Product Use in the Workplace
Showers and wet rooms need to have smooth and clean surfaces so as to avoid slipping or injury. Other uses include:
- Public conveniences.
- Metal-constructed warehouses.
Features & Benefits
- Exceptional adhesion to properly prepared surfaces.
- Touch-dry in 3-4 hours. Overcoat dry in 8 hours.
- Perfect primer coat for the Nu-Guard AG System.
- Water soluble.
Ensure surfaces to be treated are clean, free from contamination and dry. Previously coated surfaces should be abraded.
By brush/roller or spray. Should not be applied at temperatures below 5°C or when the relative humidity exceeds 85%. All equipment should be cleaned with water immediately after use. Store away from direct sunlight and sources of heat. Protect from frost.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Touch Dry
- 3-4 hours
Be the first to ask a question about this product!