A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs. HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutes
Instarmac UltraCrete QC10 Rapid Strength Concrete
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation.
- HAPAS Approved since 2005
- 20N/mm² compressive
- Rapid set: 10-20 minutes strength in 2 hours
- Open to traffic: 2 hours • Shrinkage compensated
Instarmac UltraCrete QC10 Rapid Strength Concrete
QC10 is a rapid setting concrete designed for thick section repairs, haunching reinstatements, ironwork backfilling and commercial sign/post installation. It has been HAPAS approved since 2005 and can be opened to traffic in 2 hours.
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 250mm
- 20N/mm² compressive strength in 2 hours
- Can be bulked out in certain applications (may affect performance)
- Approved for use on the London Underground and Overground
QC10 is ideal for haunchings, commercial sign/post installation and ironwork backfilling
QC10 contains special cements and graded aggregate, the product requires only the addition of water on site to form a high strength concrete. UltraCrete QC10 is suitable for applications from 30mm - 250mm in one pass.
All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. (Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product).
Full preparation and mixing instructions can be found on the product data sheet.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 1 Part
- Key Features
- Workability: 5 – 10 minutes. Set time: 10 – 20 minutes . Depth: 30mm – 250mm 20N/mm² compressive strength in 2 hours. Can be bulked out in certain applications (may affect performance). Approved for use on the London Underground and Overground
- 1m² @ 12mm approx
- Compressive Strength (at 20°C)
- 1 hour 12.00 2 hours 20.00 24 hours 30.00 7 days 40.00 28 days 50.00
- Shelf Life (from date of manufacture)
- Shelf life from date of manufacture in correct conditions for sealed packaging is 8 months.
Be the first to ask a question about this product!
A non-shrink concrete designed for the surface reinstatement of ‘picture frames’ or fillets around access covers and surface areas around street furniture. Shrinkage compensated Excellent workability Rapid set: 15 minutes BT Approved Anti-vandal Open to traffic: 4 hours
High specification C40 concrete in a bag, ideal for applications with limited site access where bulk concrete cannot be delivered. Easily transportable Flowable Pre-blended cement for a consistent mix High compressive strength 55N/mm²
Fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks. Shrinkage compensated High compressive strength 66N/mm² Foot traffic: 2 hours Pre-blended, just add water
For the installation of light duty posts, fences and poles Light duty applications Rapid set: 15 minutes Pre-blended, just add water 25N/mm² compressive strength
Coo-Var Danish Oil is a hard, durable, water resistant seal for the enhancement of interior and exterior wood containing tung oil. Product Features Harder finish than teak oil Durable Water resistant Slight gloss finish
HMG Acid Cat MB Colours. A high solids, compliant system designed for application onto wood substrates offering fast drying and excellent colour retention. Available in a wide range of RAL and BS colours. Click to jump down to Technical Data
Coo-Var Matt Black gives a quick drying nonreflective finish to wood, metal, ironwork, plaster and many more surfaces. Product Features For tudor style beams. Photographic work. Chalk boards. Anywhere a non-reflective surface is required. Not suitable for canvas roller chalk boards. Suitable for interior and exterior use.
Blackfriar Polyurethane Varnish transforms interior woodwork. This tough and durable varnish brings out the natural grain and colours of wooden surfaces – and protects them from household stains including hot water. For all types of interior wood. It is tough and durable, resists hot water splashes and dilute acids and is solvent based....
Mathys Fassilux Satin is a first quality satin gloss alkyd enamel, for interior and exterior woodwork, to be used as a topcoat on wood and all pretreated not alkaline substrates. Simple and fast application Excellent flow Excellent scratch and wear resistance Good outdoor durability, weatherproof Quick drying Good coverage Even gloss...
Blackfriar Button Polish can be used on new, stained, or previously French Polished wood for a classic look. It produces a high gloss finish based on Button Shellac. Product Features Interior use. High gloss, fine finish. Shellac based. Use on new, stained or previously French polished wood.
Mathys Fassilux Aqua XPE Gloss is a water based, scratch resistant finish on properly prepared wooden or other already painted mineral substrates for interior or exterior use. Quick drying Low in odour and VOC Easy to apply Excellent flow and levelling characteristics Superior scratch resistance Stable gloss Good adherence, hiding...
Mathys Fassilux Aqua XPE Matt is a water based, scratch resistant matt finish for interior timber and previously painted mineral surfaces. Specially designed for interior use Quick drying Low in odour and VOC Easy to apply Excellent flow and levelling characteristics Superior scratch resistance Stable gloss Good adherence Hiding...
Mathys Fassithane Gloss is a clear, hard, durable finishing varnish for wood, that is based on polyurethane alkyd resins that can be used indoors and outdoors and is solvent based giving excellent durability. Quick drying Does not yellow Scratch and wear resistant No tendency to wrinkle when applying thick layers
A high quality, quick drying, non yellowing acrylic polyurethane satin enamel for interior and exterior use on timber, metals, plastics, masonry, previously painted surfaces and more.
Coo-Var Ebony Black provides a classic black finish with low sheen which makes it ideal for ironwork, beams, downpipes, radiators etc. Suitable for both interior and exterior applications. Product Features Can be applied to wood, metal and masonry Decorative Multi-purpose Classic, black finish Interior and exterior use
A low-VOC wood oil for protection against stains and wear. Very rapid curing saves time and costs. Non-yellowing, non-darkening and easy to maintain and clean. Can be used as a Topcoat for Timberex Aqua and Active Stain.
Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.
Coo-Var Polyurethane varnish is a single pack product of exceptional durability based on urethane alkyd. For interior use only. Product Features For Interior Use Suitable Surfaces: Wood Finish: Matt Application: Roller or brush Drying time: Touch Dry 2 hours or 12 hours hard dry Overcoat time: 12 hours or overnight Estimated...