This product is temporarily unavailable; in the meantime, our technical team recommend Coo-Var Teak Oil as a great alternative - use discount code SAVE10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Blackfriar Teak Oil protects and revives wood – especially hard woods, teak and Scandinavian furniture. Protects against weathering and greying by nourishing and feeding the wood.
Blackfriar Teak Oil protects, revives and enhances the appearance of Teak and similar hardwoods. Ideal for hardwood furniture, doors and panelling. When used regularly it will reduce the risk of wood greying, weathering and surface splitting.
Features & Benefits
Protects against weathering and greying
Nourishes and feeds wood
Reduces surface splitting
For interior and exterior use
Preparation
Ensure surface to be oiled is smooth, clean, dry and free of contamination. For surfaces previously treated with oils or waxes clean back the surface to bare timber with fine wire wool and white spirit, working along the grain. Previously painted or varnished surfaces should be stripped back to bare using Blackfriar Professional Paint and Varnish Remover. Any French polish on surfaces must also be completely removed.
Application
Ensure the product is thoroughly shaken prior to use. Apply oil liberally by brush or rag. Leave for a few minutes for the oil to absorb into the wood then wipe off any surplus. Allow the oil to dry for 24 hours before using or recoating. When applying to new wood thin the first coat with 5% white spirit.
Thinning
Maximum 10% white spirit.
Limitations
Do not apply in wet conditions or if the temperature is below 5°C. For best results apply a minimum of three coats leaving a minimum of 24 hours between coats. Apply regularly to maintain protection of wood (at least annually).
Coverage
Up to 14m² per litre per coat. Dependant on porosity of wood.
Drying Time
Touch dry in 6 - 8 hours. Recoat after 24 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Clean Up
Take extra care as application cloths and soiled cleaning rags may self ignite without warning. Lay cloths out flat in single layers to dry, or wash out thoroughly in warm soapy water before disposal. Remove as much product from application equipment as possible before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
This product is temporarily unavailable; in the meantime, our technical team recommend Thermoguard Thermostrip PRO as a great alternative - use discount code SAVE10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without...
