Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 5 products.
Active filters
International Interplus 770 is a low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate coating intended for use as a versatile, high performance maintenance coating to upgrade tightly adhering existing coatings to longer life durable systems.4,800+ colours, inc. RAL, RAL Design &...
£184.54 (incl. VAT)
£153.78 (ex. VAT)
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature.Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
£63.04 (incl. VAT)
£52.53 (ex. VAT)
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer.Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for...
£52.70 (incl. VAT)
£43.92 (ex. VAT)
Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products....
£54.46 (incl. VAT)
£45.38 (ex. VAT)
Hempathane Fast Dry 55750 is a 2-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate.Recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations May be specified as a one-coat direct-to-metal system in corrosive...
£67.06 (incl. VAT)
£55.88 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
