Stimsonite 980 Road Studs - Limited Stock

Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.

Price £1.99 Regular price £5.16
In stock
All sale products

Need Help?

120 Mins - Internal Off-Site Application

Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

There are 11 products.

Showing 1-11 of 11 item(s)

Active filters

Jotun Steelmaster 120SB

Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Price £195.23
In stock

International Interchar 2090

International Interchar 2090 is a single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to maintain your architectural aesthetics whilst providing fire protection for up to 120 minutes for columns, I-sections, cellular beams and hollows.

Price £446.96
In stock

International Interchar 212

International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires.

Price £630.02
In stock

Nullifire S606 Solvent-Based Intumescent Coating

Nullifire S606 Solvent-Based Intumescent Coating is a single pack solvent-based intumescent coating for fire protection of both internal and external structural steelwork. S606 is very pale pink in colour. S606 provides effective structural fire protection for steelwork, from 60 minutes up to a 120 minute fire rating. Suitable for universal and hollow...

Price £177.12
In stock

Sherwin-Williams FIRETEX FX9500

Sherwin-Williams FIRETEX FX9500 is a scrim free, epoxy intumescent coating suitable for cellulosic fire protection designed for extreme external environments. It is designed for application by airless spray to provide fire resistance for periods of up to 120 minutes on structural steel. It is an exterior durable intumescent, which can be applied directly...

Price £220.30
In stock

Sherwin-Williams FIRETEX FX6000

Sherwin-Williams FIRETEX FX6000 is an ultra fast-drying and durable intumescent coating designed to give the shortest possible time from application to handling for fire resistance periods up to 2 hours. The cured paint film is durable and damage resistant and can be exposed to the weather after 4 hours @ minimum 15°C.

Price £277.99
In stock

Sherwin-Williams Firetex M95

Sherwin-Williams Firetex M95 is an epoxy intumescent suitable for cellulosic fire protection. Firetex M95 is an exterior durable intumescent, which can be applied directly onto blast cleaned steel. 

Price £172.41
In stock

PPG SteelGuard 751

PPG SteelGuard 751 is a one-component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Provides up to 120 minutes protection from cellulosic fires. Top Features Tested and assessed to EN 13381-8, BS 476-20/21 and AS 1530.4 CE marked product, ETA 15/0439 Assessed to ETAG 018-2 for all durability...

Price £469.20
In stock

PPG SteelGuard 564

PPG SteelGuard 564 is a one-component, thin-film, solvent-borne intumescent coating for fire protection of structural steelwork. Steelguard 564 is fast-drying and can provide up to 120 minutes protection. Top Features Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is...

Price £557.20
In stock

PPG SteelGuard 801

A one component thin-film solvent-borne intumescent coating for fire protection of structural steelwork, providing up to 120 minutes of protection from cellulosic fires. Top Features Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required Tested and assessed to EN...

Price £400.00
In stock

PPG SteelGuard 851

A one component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Short handling times are accomplished due to the fast-drying nature of this coating, and provides up to 120 minutes of protection from cellulosic fires. Top Features Suitable for C1 to C4 internal and external environments (ISO 12944);...

Price £420.20
In stock