Description
We no longer stock this product, but can recommend Rust-Oleum Mathys Dac Hydro Plus as a great alternative.
Rust-Oleum Mathys Dac Hydro D is a high build, waterborne acrylic pitched roof coating that renovates and protects in a durable way concrete and terracotta roof tiles. It provides excellent resistance against weathering and a particularly aesthetic and durable decorative finish which breathes, is flexible and adheres to most mineral substrates.
Features & Benefits
- Higher layer thickness gives extra protection
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Rain-proof after just 1 hour
- Smooth decorative finish with lasting colour and gloss
- Safe and easy to use
Surface Preparation
After a good cleaning with pure water under high pressure (200 bars), all substrates have to be dry, clean, not chalking and normally absorbent (untreated roof tiles). For very closed substrates like varnished or enamelled tiles, an adhesion coat of Rust-Oleum Mathys Noxyde diluted with 25% water should be applied. For all other substrates: corrugated asbestos cement sheets, concrete tiles of the Redland type and all weathered and/or very absorbent substrates, it is necessary to apply an adhesion coat of Rust-Oleum Mathys Primer 44 HS. It is recommended to perform an adhesion test prior to use and it is not advisable to apply Rust-Oleum Mathys Dac Hydro D on artificial slates type “Eternit”.
Directions for Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Application & Thinning
- Brush: Apply undiluted
- Roller: Apply undiluted
- Air-atomised spray: Not recommended
- Airless spray: Dilute with max. 3% of water. Nozzle: 015 - 021 / Pressure: 160 - 220 bars
- Cleanup: Water
Application Conditions
Temperature of air, substrate and coating material must be above 8°C and relative humidity below 80%. The substrate temperature must be at least 3°C above dew point.
Remarks
Apply in 2 coats to avoid local gloss differences.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
Data sheet
- Base Type
- Water Based
- Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 2 Hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 1 Week
- Coverage
- 6m² per litre
- Min. Application Temperature
- 8°C
- Density
- 1,2
- Solids by Volume
- 40 %
- VOC
- 40 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 1 Hour
- Recommended Dry Film Thickness
- 65 µm
- Recommended Wet Film Thickness
- 170 µm
- UN Number
- Not regulated
Attachments
Download
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Gareth on 2019-04-30 15:59:24
