Rust-Oleum 9170 Epoxy Metal Primer
A fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions.
Rust-Oleum 9170 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal. Rust-Oleum 9170 Epoxy Metal Primer is the best fast drying primer for bare and galvanised metal under severe conditions.
Rust-Oleum 9170 Epoxy Metal Primer is designed for application on bare or blasted metal and can be recoated with Rust-Oleum 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions.
Features & Benefits
- Fast drying
- High film build; up to 100 microns dry in one coat is possible
- Easy to apply
- Excellent adhesion
- Easy mixing (1:1 ratio)
Please note: This product is recoatable with 9100 Epoxy topcoat and if good U.V. resistance is required, Rust-O-Thane Polyurethane Topcoat 9600 should be applied.
- Typical Coverage (per coat)
- 7m² per litre
- Touch Dry
- 1 Hour
- Brush, Roller, Spray
Be the first to ask a question about this product!
Sherwin-Williams Macropoxy C267V3 (formerly known as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Sherwin-Williams Macropoxy C267V3 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and petroleum solvents.
A fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. It is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
Sherwin-Williams Macropoxy C400W (formerly known as Epigrip C400W) is a multi-functional epoxy zinc phosphate coating specified for use as a primer on blast cleaned structural steel for internal and external environments. Sherwin-Williams Macropoxy C400W may also be used as a high build intermediate coat as well as the final coat where a low sheen...
A water thinnable, general purpose metals primer which has very good anti-corrosive properties suitable for priming most metals including iron, steel, aluminium, brass, copper and more.
Nu-Steel® TP Etch Primer is a two pack primer giving excellent adhesion to metals prior to subsequent paint systems. Advantages Up to 8 years protection. Available in yellow or grey. 15m²/Litre approx. coverage rate. 12-month shelf life.
Cromadex V39 Rail Refurbishment Primer is an alkyd primer formulated for refurbishment programmes in the rail industry. When used as a system with Cromadex V60 Two Pack Rail Topcoat it meets the following specifications. BS 6853 1999 Annex B, BS 476 Part 6 : 1989 Class 0, BS 476 Part 7 : 1997 Class 1.
A high build fast drying modified alkyd primer for use on ferrous metals. Ideal for priming in industrial and factory environments. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Can be applied up to 75-100 microns Protects against corrosion on properly prepared steel Dries quick
Jotun Jotamastic 70 is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel and aged coating surfaces. Typically used for structural steel in atmospheric environments.
International Interplus 770 is a low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate coating intended for use as a versatile, high performance maintenance coating to upgrade tightly adhering existing coatings to longer life durable systems.
Offers excellent corrosion protection of steel during normal storage and fabrication, and reduces exposure to fumes during welding and cutting compared with high zinc shop primers. Especially suitable for highly corrosive environments.
Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the finishing coating...