Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Our industrial heat resistance paints offer a range of protection using zinc, aluminium, ceramic and epoxy coatings.
They can withstand a variety of temperatures, ranging as high as 1000°C, and offer fast-curing properties. A variety of colours are available in certain products on request. This makes them ideal for use on refineries and offshore structures, as well as smaller surface areas such as boiler fronts and incinerators.
There are 12 products.
Active filters
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless...
£116.51 (incl. VAT)
£97.09 (ex. VAT)
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
£78.46 (incl. VAT)
£65.38 (ex. VAT)
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium...
£72.58 (incl. VAT)
£60.48 (ex. VAT)
Jotun Epoxy HR is a two component polyamine cured novolac epoxy coating that is heat resistant up to 200°C and can be applied on hot substrates up to 150°C. It can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates....
£345.77 (incl. VAT)
£288.14 (ex. VAT)
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc. Coverage Calculator More Information Delivery Info
£232.51 (incl. VAT)
£193.76 (ex. VAT)
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
£921.23 (incl. VAT)
£767.69 (ex. VAT)
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required. Coverage Calculator More Information...
£75.85 (incl. VAT)
£63.21 (ex. VAT)
Sherwin-Williams Heat-Flex M505 is an air drying silicone resin based heat resistant matt finish coating. It is used for application on to steel surfaces previously coated with Dox-Anode D5V2 or zinc or aluminium metal spray, where heat resistance is required. Please note: Also available in White 5L and Aluminium 20L subject to a a minimum...
£236.03 (incl. VAT)
£196.69 (ex. VAT)
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
£95.58 (incl. VAT)
£79.65 (ex. VAT)
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications. Please note: Aluminium is normally a stock item, however we would recommend contacting our Sales Department on 0113...
£2,072.10 (incl. VAT)
£1,726.75 (ex. VAT)
Jotatemp 1000, formerly known as Jotatemp 1000 Ceramic, is resistant to low temperatures down to -196°C and high temperatures up to 1000°C continuously, where substrates allow. Can be used as primer or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel and ceramic substrates. It can be applied...
£371.00 (incl. VAT)
£309.17 (ex. VAT)
Sherwin-Williams Heat-Flex M505 - Special Order is an air drying silicone resin based heat resistant matt finish coating. It is used for application on to steel surfaces previously coated with Dox-Anode D5V2 or zinc or aluminium metal spray, where heat resistance is required. Maximum Surface Temperatures:White: up to 250°C with no...
£301.85 (incl. VAT)
£251.54 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
