Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 7 products.
Active filters
This Jotun Paints product is a high solids, very high zinc dust content primer for highly corrosive environments and can be applied down to 0°C surface temperature. Jotun Barrier Plus is a two component polyamine cured zinc rich epoxy coating.
£287.12 (incl. VAT)
£239.27 (ex. VAT)
Jotun Penguard Express is a two component amine cured epoxy coating that is fast drying, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
£54.08 (incl. VAT)
£45.07 (ex. VAT)
Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
£226.50 (incl. VAT)
£188.75 (ex. VAT)
Jotun Penguard Express MIO is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in...
£74.02 (incl. VAT)
£61.68 (ex. VAT)
A two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
£72.12 (incl. VAT)
£60.10 (ex. VAT)
Jotun Penguard Low Temp Additive is recommended when a faster curing or painting at lower substrate temperatures. This is an additive for improved low temperature curing of the following products:Penguard HBPenguard PrimerPenguard Special
£7.18 (incl. VAT)
£5.98 (ex. VAT)
Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It cures down to 5°C and is specially designed for new construction where fast dry to handle and over coating times are required. Note: Grey XO is made to order and has a minimum order...
£343.86 (incl. VAT)
£286.55 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
