Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
Choose damp-tolerant primers to speed up application of floor screeds, coatings and other floor coverings including carpets, tiles, vinyl and wood, with excellent adhesion to damp concrete and asphalt. Reducing disruption and downtime to businesses, our range of damp-tolerant primers are tolerant to residual moisture in concrete floors and enable earlier access onto the floor to apply coatings, paints and coverings.
Our wide collection of products includes rapid cure primers for low temperatures, low odour primers ideal for indoor applications, and options with very good chemical resistance.
Our Technical Support Team are on hand to advise on the best solution for your needs - contact them on 0113 2455450 (option 2) or send a message to [email protected].
There are 19 products.
Active filters
401 Epoxy Floor Primer is a two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Ideal for use as a clear sealer on concrete and masonry surfaces.Also available in 4,000+ colours from RAL, BS, NCSSee...
£84.00 (incl. VAT)
£70.00 (ex. VAT)
401 WG Epoxy Floor Primer is a fast curing, two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Designed be used in lower temperatures or when rapid overcoating/access is required.Excellent adhesion to...
£109.44 (incl. VAT)
£91.20 (ex. VAT)
402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes.Also available in 4,000+ colour options from RAL, BS and NCSPlease see 402 Damp...
£120.00 (incl. VAT)
£100.00 (ex. VAT)
402 WG Damp Proof Coating has been developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required.Also available in 4,000+ colour...
£126.00 (incl. VAT)
£105.00 (ex. VAT)
405 Tack Primer is an adhesion promoted primer developed for use in conjunction with various epoxy coatings and screed in our range.Solvent free, low odour Excellent adhesion to concrete and steel Impervious to water Low viscosity, easily applied May be applied to cool, damp surfaces Pre-packaged units ready for use Very good...
£33.60 (incl. VAT)
£28.00 (ex. VAT)
709 MMA Damp Proof Primer has been developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds.Rapid cure, even at low temperatures - from as low as -30°C* Very good chemical resistance Excellent adhesion to damp concrete Impervious to water Pre-packed units ready for use Easily...
£134.40 (incl. VAT)
£112.00 (ex. VAT)
Coo-Var Dampshield is a two-component epoxy resin membrane that is tolerant to residual moisture in concrete floors. This enables earlier access onto the floor than would otherwise be available for the application of screeds, coatings and other floor coverings including carpets, tiles, vinyl and wood.Enables resin finishes sooner Easy...
£39.59 (incl. VAT)
£32.99 (ex. VAT)
Nu-Base Epoxy Floor Primer is a two pack epoxied resin bonding agent.For use as a primer in conjunction with Nu-Base HB Epoxy Floor Finish Acts as a damp-proof membrane provided no water pressure exists, and cures under damp conditionsMore Information**Available for delivery - see Delivery Options below**
£144.45 (incl. VAT)
£120.38 (ex. VAT)
Nu-Base Hydroseal is a two component epoxy resin surface damp-proof membrane. Designed to suppress the effect of residual moisture in concrete that already contains an integral D.P.M.Enables earlier access onto the floor than would otherwise be available for the application of resin finishes and other floor coverings including carpets,...
£188.10 (incl. VAT)
£156.75 (ex. VAT)
Remmers Epoxy MT 100 is a special primer for matt damp substrates based on a transparent epoxy resin. Substrate-tolerant up to 6 % residual moisture (CM method) Fast curing / can be coated after a short time Full cure from +5°C Can be subjected to mechanical loads Can be subjected to chemical loads Free from plasticisers and...
£76.80 (incl. VAT)
£64.00 (ex. VAT)
RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on...
£176.52 (incl. VAT)
£147.10 (ex. VAT)
Sika Primer MB is a primer and moisture control coating for cementitious substrates prior to levelling or bonding with elastic sikabond adhesives. It is a one coat, 2-part, solvent free, low viscosity, epoxy resin primer for use in conjunction with Sika Schönox levelling compounds, dispersion primers and SikaBond Wood Floor adhesives....
£166.39 (incl. VAT)
£138.66 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
