Heskins Bolt Down Plates are ideal for providing a safe and stable anti slip tape installation on an unstable surface, such as sodden timber, flaking or saturated concrete, etc, seen on marine jetties, garden steps, and concrete paths prone to icing over in winter. Whilst most materials require adhesive, a dry surface, and a sound substrate, Bolt Down Plates screw into place with mechanical fixings and are manufactured from 1.6mm weatherproof aluminium, coping with even the most difficult environmental conditions.

Particularly wet weather and wintry conditions can result in accidents around the workplace, with customers slipping and workers and staff sliding down steps and loosing footing in areas such as fire exits. Bolt Down Plates help provide anti slip support on a wide range of surfaces, such as non slip tape for decking, and substrates and can be coated with Safety Grip self adhesive anti slip tape in many colours, including hazard warning chevrons and photoluminescent Glow In The Dark. The plates are available in a flat design for screwing onto a surface, or in a L-shape (120mm x 635mm x 45mm) for fixing to steps and stairs.

If using on ocean going boats or on substrates adjacent to sea water, the aluminium can corrode due to galvanic reaction. Please contact our sales team on 0113 2455450 to enquire regarding Stainless Steel Bolt Down Plates.

See the videos above for more details and for application.

See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.

Ordering References

Choose your preferred grip type, a colour (see below for available options), and the size of Bolt Down Plate required.

More sizes can be made to order; Bolt Down Plates can be coated in most of Heskin's range of abrasive and non-abrasive anti-slip materials in addition to those available here - contact our sales team on 0113 2455450 to discuss your requirements.

H3409 Bolt Down Plates - Aluminium Plates with Safety-Grip coating

Grip type: Standard

Available colours:

• Black
• Red (RAL3020)
• Yellow (RAL1023)
• Blue (RAL5000)
• Green (RAL6010)
• Grey (RAL7004)
• Brown (RAL8002)
• White
• Transparent
• Fluorescent (RAL1016)
• Black/Yellow Hazard
• Red/White Hazard
• Orange

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm
• 63mm x 635mm
• 115mm x 1m

Grip type: Coarse

Available colours:

• Black
• Yellow (RAL1023)
• Black/Yellow Hazard

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm
• 63mm x 635mm
• 115mm x 1m

Grip type: X-Coarse

Available colours:

• Black

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm
• 63mm x 635mm
• 115mm x 1m

Grip type: Aqua-Safe

Available colours:

• Black
• White
• Transparent
• Grey (RAL7037)
• Beige (RAL1035)

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm
• 63mm x 635mm
• 115mm x 1m

Grip type: Resilient

Available colours:

• Black
• Green (RAL6001)
• White (RAL9003)
• Yellow (RAL1023)
• Red (RAL1020)

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm
• 63mm x 635mm
• 115mm x 1m

H3409GID Bolt Down Anti Slip Aluminium Plates

Grip type: Standard

Available colours:

• Luminous

Sizes available:

• 115mm x 635mm
• 120mm x 635mm x 45mm

Product Data

The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test.

Glow in the Dark Safety-Grip® Results

• 30 millicandela per m² at 2 minutes
• 5mcd after 10 minutes

Photoluminescent tests performed by Luminous Technologies Ltd, England

Coefficient of Friction Data

The above tests were conducted in accordance with ASTM C 1028-96, the tests were conducted at a recognised independent friction testing laboratory, and copy certificates are available on request. ASTM C 1028-96 is a static test, for dynamic test results conducted via pendulum with four S rubber slider.