Tikkurila Temathane PC 50, a high-solids two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate recommended for painting of storage tank exteriors, steel buildings and other steelwork.
Huge colour range available, with RAL, BS & NCS shades
Prequalified in the NORSOK system 1 and therefore an excellent choice for the most demanding application areas such as offshore environments, refineries, power plants and bridges
Forms easy-to-clean and non-chalking topcoat with good gloss and colour retention
Used as a semi-gloss topcoat for epoxy systems exposed to weathering steelwork
For industrial and professional use only
Product customisation
Don't forget to save your customization to be able to add to cart
Tikkurila Temathane PC 50 is a high-solids two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate, used as a semi-gloss topcoat for epoxy systems exposed to weathering.
Temathane PC 50 forms an easy-to-clean and non-chalking topcoat with good gloss and colour retention, and is an excellent choice when a high-solids topcoat with extremely good gloss and colour retention is required.
Prequalified in the NORSOK system 1 and therefore an excellent choice for the most demanding application areas such as offshore environments, refineries, power plants and bridges
Huge colour range available, with RAL, BS & NCS shades
Excellent choice when a high-solids topcoat with extremely good gloss and colour retention is required
Prequalified in the NORSOK system 1 and therefore an excellent choice for the most demanding application areas such as offshore environments, refineries, power plants and bridges
Excellent weather and abrasion resistance
Forms easy-to-clean and non-chalking topcoat with good gloss and colour retention
Used as a semi-gloss topcoat for epoxy systems exposed to weathering
Recommended for painting of storage tank exteriors, steel buildings and other steelwork
For industrial and professional use only
Technical Data
Volume solids
65±2% (ISO 3233)
Weight solids
76±2%
Specific gravity
1.3 ± 0.1 kg / l (mixed)
VOC
The Volatile Organic Compounds amount (ISO 11890) is 330 g/litre of paint mixture.
VOC content of the paint mixture (thinned 15 % by volume) is 410 g/l.
Pot Life (23℃):
1½ hours
Mixing Ratio
Base (Temathane PC 50):
5 parts by volume
Hardener (008 7590):
1 part by volume
Recommended Film Thicknesses & Theoretical Coverage
Recommended film thicknesses
Theoretical coverage
Wet
Dry
125µm
80µm
8.1m²/l
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 80µm
5℃
10℃
23℃
35℃
Dust dry, after
2 hours
1hour 15 minutes
1 hour
20 minutes
Touch dry, after
10 hours
8 hours
6 hours
3½ hours
Recoatable, after
No limitations
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat.
Note the overcoating time of primer. (ISO 12944-4)
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below 5℃ during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
First stir base and hardener separately.
The correct proportions of base and hardener must be mixed thoroughly before use.
Use power mixer for mixing.
Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5–30 minutes and then apply the full coat.
For airless spraying:
The product is thinned depending on the temperature of the components (base, hardener, thinner) approximately 0–15%.
Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar.
Spray angle shall be chosen according to the shape of the object.
For conventional spraying:
The product is thinned depending on the temperature of the components (base, hardener, thinner) approximately 5–15%.
Recommended nozzle tip is 1.6–1.8 mm and pressure 3–4 bar.
Prequalified in the NORSOK system 1 and therefore an excellent choice for the most demanding application areas such as offshore environments, refineries, power plants and bridges
Coverage
8.1m²/l
Recommended Thinner/Cleaner
Thinner 1048, Thinner 1067, Thinner 1061
Unit Contents
Base, hardener
Compatible Primers
Temacoat GPL-S Primer, Temacoat GPL-S MIO, Temacoat GF Primer & more - see data sheets
Compatible Topcoats
Temathane PC 50, Temathane PC 80, Temadur Clear
Min. Application Temperature
The temperature of the ambient air, surface and paint should not fall below 5℃ during application and drying.
Solids by Volume
65±2% (ISO 3233)
VOC
The Volatile Organic Compounds amount (ISO 11890) is 330 g/litre of paint mixture. VOC content of the paint mixture (thinned 15 % by volume) is 410 g/l.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temathane PC 50 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Temabond ST 200 is a two component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications.
Surface-tolerant high-solids epoxy paint.
Very good adhesion even to hand-prepared steel.
Lower VOC emissions...
Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation.
Surface-tolerant with a wide colour range
For steel and concrete surfaces
Very good adhesion, even to hand-prepared steel
Lower VOC...
Tikkurila Temacoat GF Primer is a two component, polyamide cured epoxy primer containing zinc phosphate that is used as a primer for steel, zinc and aluminium surfaces.
For industrial and professional use only
For use in epoxy and polyurethane systems
For use where high requirements for appearance are set
Recommended for agricultural...
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environments
Fast cure and low-temperature cure hardeners available - click to...
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate.
Excellent adhesion to steel, zinc and aluminium surfaces.
Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress.
Can be overcoated after a prolonged period of time.
Faster...
Tikkurila Temacoat Primer, a two-component resin modified epoxy paint containing anti-corrosive pigments that can be applied at sub-zero temperatures as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress.
Recommended for building frameworks, tubular bridges, conveyors and other steelwork and...
Tikkurila Temacoat RM 40, a two-component, resin modified epoxy primer/topcoat that can be used as a single-coat system.
Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress
Suitable for concrete surfaces and has a CE marking
Can be used on steel structures in wet environments, e.g. inside...
Tikkurila Temacoat SPA Primer, a two-component resin modified epoxy primer with anti-corrosive pigments with excellent adhesion to steel, zinc and aluminium surfaces, that can be applied in thick layers, thus enabling faster production.
Has high solids content
Used as a primer or an intermediate coat in paint systems exposed to abrasion...
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces.
Huge colour range available with RAL, BS & NCS shades
Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
Tikkurila Temadur 20, a 2-pack semi-matt polyurethane paint that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC.
Huge colour range available with RAL, BS...
Tikkurila Temadur Clear provides extra protection and colour and gloss improvement, used for topcoating polyurethane paint systems making the paint film durable, non-chalking and easy to clean.
Two-component, glossy polyurethane varnish, hardener aliphatic isocyanate
MED (Marine Equipment Directive) certificate no EUFI29-19002225- MED and...
Tikkurila Temaprime GF is a fast-drying one-component anti-corrosive pigmented special primer. Recommended uses include haulage equipment, agricultural, construction and other machinery.
Huge colour range available
Primer for steel, aluminium and zinc surfaces
Recoatable also with polyurethane paints
Excellent anti-corrosive properties...
Tikkurila Thinner 1048 is a thinner for polyurethane paints, oxirane ester paints, 2-component acrylic paints, polyaspartic paints and polysiloxane paints.
For use with recommended Tikkurila products.
Tikkurila Temathane PC 50, a high-solids two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate recommended for painting of storage tank exteriors, steel buildings and other steelwork.
Huge colour range available, with RAL, BS & NCS shades
Prequalified in the NORSOK system 1 and therefore an excellent choice for...
Tikkurila Temathane PC 80, a high-solids two-component, glossy polyurethane paint (with hardener aliphatic isocyanate) that is particularly suitable for harsh environments, helping extend the service life of the paint system.
Huge colour range with RAL, BS & NCS shades
Excellent choice when a high-solids topcoat with extremely good...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
