Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 154 products.
Active filters
Axalta Plicote HB Finish is a highly durable acrylated rubber coating that is suitable for direct application onto suitably prepared exterior masonry and Plastisol cladding, where the product offers anti-carbonation properties and a reduction in the ingress of water and chlorine ions.Can be used for overcoating surfaces previously painted...
£0.00 (incl. VAT)
£0.00 (ex. VAT)
PPG SigmaGuard 603 is a two-component, solvent-free, amine-cured epoxy coating.One-coat protection for maintenance or major refurbishment of ballast water tanks and crude oil tanks Tolerant to marginal surface preparation Good corrosion resistance Can be applied by heavy-duty, single-feed, airless spray equipment (60:1) Reduced...
£474.74 (incl. VAT)
£395.62 (ex. VAT)
PPG NovaGuard 4801, a high performance coating for new or old steel with excellent resistance to chemicals at high temperatures and (in)organic acids. Please note that this product is imported and has a 2-4 week lead time.Two-component, glass flake reinforced novolac vinyl ester Good resistance to a wide range of solvents Suitable for...
Cromar Rubber Coat Waterproof Coating (formerly Cromar Rubber Coat Liquid Roof Coating) is a brush, roll-on and sprayable high-performance coating that can be applied over many existing surfaces including concrete, wood, brick and metal, forming a durable and seamless waterproof membrane.Freeze/thaw stable; Water based; UV resistance - not...
£54.04 (incl. VAT)
£45.03 (ex. VAT)
Rustins G Shield Electro Smog Shielding Paint is a new generation special carbon coating for reduction of electromagnetic interference (EMI). It is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency...
£148.50 (incl. VAT)
£123.75 (ex. VAT)
Coo-Var Swimming Pool Paint is a high quality chlorinated rubber coating for protecting and redecorating swimming pools.Can be used on prepared, new concrete pools as well as previously chlorinated rubber painted pools Good coverage, up to 14m2 per litre Applies by spray or brush Available in white and 3 blue colours (choose below)
£91.00 (incl. VAT)
£75.83 (ex. VAT)
Flag Bilge Paint is a one coat paint system for all internal hull surfaces, ideal for bilge areas, giving good resistance to oil, fuel, grease, salt water and fresh water. It is a high opacity polyurethane paint for surfaces such as GRP, wood, steel and concrete. For marine use on bilges, lockers, engine compartments Ideal for GRP, wood,...
£17.86 (incl. VAT)
£14.88 (ex. VAT)
Hempadur 85671 is an amine adduct cured, phenolic epoxy (novolac) coating with very good adhesion and excellent chemical and high temperature resistance.For professional use only Use as interior lining in tanks, pipelines, railcars, etc, as external coating for the protection of insulated (CUI) and uninsulated process pipework and vessels...
£233.81 (incl. VAT)
£194.84 (ex. VAT)
Hempadur 35760 is a solvent-free, two-component, high-build phenolic epoxy paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance.For professional use only As a tank lining for new and old storage tanks containing oils, fuels, bio fuels and a wide range of chemicals,...
£412.60 (incl. VAT)
£343.83 (ex. VAT)
A 2-component polyamide cured epoxy high build non-skid coating for steel decks and concrete in severely corrosive environments and/or subject to mechanical wear.Forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and...
£281.94 (incl. VAT)
£234.95 (ex. VAT)
Resichem 503 SPEP is a low viscosity epoxy primer designed to seal concrete and cementitious surfaces. On curing the primer consolidates the surface and ensures excellent adhesion of other coating systems. Penetrating primer for concrete and cementitious surfaces such as internal & external tanks surfaces, floors, structural concrete....
£63.00 (incl. VAT)
£52.50 (ex. VAT)
Resichem 501 ARXL is a high build solvent-free abrasion resistant epoxy coating containing hardened ceramic particles to give superior abrasion resistance to steel and concrete structures. Resichem 501 ARXL must be applied as a 2 coat system to properly prepared surfaces. Note: Colours are approximate and not a binding representation of the...
£169.20 (incl. VAT)
£141.00 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Rawlins Paints are the UK’s leading industrial and specialist paint and coatings company, providing solutions for some of the most extreme environments and demanding workplace requirements – from fire retardant paints to heavy duty floor paints, and concrete repair materials to cladding paints. From time to time, there are scenarios and location conditions that even the leading manufacturers must produce specialist product lines with targeted deliverables for. These may be transportation and storage of chemically corrosive materials, or allowing major production companies to conduct repair and redecoration work in strictly monitored and climate controlled conditions where the temperature cannot be standardised for ‘normal’ paint application.
So, whilst we consider all our products to be special-use, this category really does cover the more extreme scenarios – offshore locations, power plants, breweries, dairies, pharmaceutical facilities, highway repairs in wintery conditions, and more.
Our help and advice promise
If you need any advice or guidance with your project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
