Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...

Price £58.12 Regular price £64.58
In stock

Sherwin-Williams Acrolon C137V2

Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...

Price £52.38 Regular price £58.20
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £34.36 Regular price £38.18
In stock
All sale products

Need Help?

All Metal Paint Ranges

There are 21 products.

Showing 1-12 of 21 item(s)

Active filters

  • Categories: Intercure
  • Categories: Intergard
  • Categories: Rust-O-Thane

International Intercure 200

International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. As a primer for steelwork intended for use in a wide range of aggressive environments,...

Price £221.00
In stock

International Intergard 1735

International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish.  Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable Available in a wide range of RAL & BS colours...

Price £77.81
In stock

International Intercure 200HS

A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions. Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...

Price £325.50
In stock

International Intergard 214

International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159. Coverage Calculator

Price £54.94
In stock

Rust-Oleum 9600 Rust-O-Thane Polyurethane

Rust-Oleum 9600 Rust-O-Thane Polyurethane is a solvent based, flexible polyurethane topcoat leaving a high gloss finish. Resistant to ponding water, UV and chemicals Rust-Oleum 9600 Rust-O-Thane Polyurethane is available in almost any colour and does not fade. Ideal for gutters, pipes, exterior metal (fences, railings, etc.), floors and other surfaces...

Price £37.59
In stock

International Intercure 324

International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer. Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977 Coverage Calculator

Price £72.99
In stock

International Intergard 251

International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. Coverage Calculator

Price £150.90
In stock

International Intercure 384

International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977 As a high build intermediate to provide...

Price £72.13
In stock

International Intergard 2510

International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. Coverage Calculator

Price £321.90
In stock

Rust-Oleum 9200 Rust-O-Thane

Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required. Rust-Oleum`s hard wearing, washable...

Price £20.72
In stock

International Intercure 420

International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions. Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...

Price £239.10
In stock

International Intergard 269

International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance. As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...

Price £43.75
In stock