Rust-Oleum CombiColor Original Aerosols are a one coat maintenance aerosol paint by Rust-Oleum for metal with superior metal protection, even direct to rust. Ideal for small maintenance and touch-up jobs.
Rust-Oleum CombiColor Original Aerosols can be applied directly on bare, manually derusted or Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion primed steel. Rust-Oleum CombiColor Original Aerosols are intended for small maintenance jobs or for touch-up. Rust-Oleum CombiColor Original Aerosols should be used in light industrial exposures, normal humidity and interior applications.
CombiColor Original Aerosols are available in 10 different colours: Gold, Zinc Yellow, Flame Red, Gentian Blue, Steel Blue, Moss Green, Fir Green, Black, White, White Aluminium.
Features & Benefits
Primer and topcoat in one
For application onto rust, bare metal and wood
Hides in one cross layer
Ideal for touch-up and small objects
Usable down to 5°C
Technical
Gloss Level: Gloss, Matt, Metallic, Satin
Propellant: Propane/Butane
Drying times at 20°C/RH 50%
Dry to handle: 6 hours
Dry to recoat: After 2 hours
Fully cured: 7 days
Theoretical Consumption
2 - 3 m² per spray can (400 ml).
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
We also stock Rust-Oleum CombiColor in a paint to be applied by brush or roller, or that can be made into a spray. This CombiColor paint comes in nearly 400 colours and will be ideal if you are looking for a spray in a different colour than CombiColor Aerosols.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
7379.0.4
Data sheet
Manufacturer
Rust-Oleum
Water / Solvent Based
Solvent
For Use On
Metal
Application Method
Aerosol
Sheen
Gloss, Satin
Colour
Standard / Ready Mixed, Fully Tintable
Single, Two or Three Pack
Single
Pack Size
400ml Aerosol
Dry to Handle (at 20°C)
6 hours
Dry to Recoat (at 20°C)
After 2 hours
Fully Cured (at 20°C)
7 days
Coverage
2-3m² per aerosol
VOC
535 - 540 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Wanting to spray paint a bird cage are your paints safe to use on the cage for my cocktaoo? Thank you
Answer:
Whilst the CombiColor aerosols are not inherently toxic, these are intended for industrial applications. Consequently no tests have been conducted on them to determine suitability or otherwise with any animals.
frank johns on 2016-01-15 22:29:13
Question:
Any reason why you only have 10 colours available in Rust-Oleum CombiColor Aerosols when you have lots of colours available in Rust-Oleum CombiColor? I need RAL 9010 and RAL 2004 in spray form.
Answer:
Rust-Oleum CombiColor Aerosols are only available in a range of ready produced colours. If you require a colour outside of what is available then you can purchase Rust-Oleum Custom Filled Aerosols which allow us to mix Rust-Oleum CombiColor in any colour (Satin or Gloss finish) and then fill it into aerosols. These aerosols have to be bought in packs of 8 x 400ml aerosols per colour. Alternatively there may be suitable colours available individually in the Rust-Oleum Hard Hat Topcoat which is a similar product.
Rust-Oleum 7301 CombiColor Thinner is a special thinner for Rust-Oleum CombiColor. Although thinning of Rust-Oleum CombiColor is not necessary for spraying, if required it is advised to use Rust-Oleum 7301 CombiColor Thinner.
Easy to pour
Reclosable packaging
Ideal for cleaning/degreasing of surfaces and equipment
More Information...
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum`s 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.
Strong dilution...
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is a high quality anti-rust primer for Rust-Oleum CombiColor. The Anti-Corrosion Primer will ensure an even longer anti-rust protection on new or rusted steel surfaces and provides and enhances protection against corrosion.
Recoatable after 2 hours
For new / slightly rusted surfaces
Grey for...
We no longer stock this product, but can recommend Rust-Oleum 3202 Galvinoleum Primer as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage