Envirograf ES/VFR White Fire Protection Coating
Unfortunately, we no longer stock this product. Thermoguard Timbercoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.
Envirograf ES/VFR White Fire Protection Coating is a water based fire retardant coating for wood and certain wood-related products to be used as part of a complete system including selected primers and topcoats. Envirograf ES/VFR White Fire Protection Coating (also available in clear) is suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0 (see product data sheets and test data for full details). Envirograf ES/VFR White Fire Protection Coating is a hard wearing product that can be used internally and externally but must always be finished with a suitable topcoat.
System Features & Benefits
- Achieve BS Class 1 & 0
- Achieve SBI B/s1/d0
- Low cost per square metre
- Easy and safe to apply
- Long term protection
Preparation & Application
See product data sheets in the 'Download' section below.
- First coat coverage could vary according to the density or type of the timber.
- For suitable applications, contact the Technical Department.
- Trials in small areas must always be carried out prior to full application, as colour performance varies according to substrate structure.
- Envirograf HWAP/WB Primer must be applied on Oak and Cedar
- Seek approval from the relevant authority for this product/system including test data prior to purchase/use (test data available upon request).
Topcoats for Envirograf ES/VFR White Fire Protection Coating
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- Brush, Roller, Spray
- 12m² per litre
- Touch Dry
- 1-2 Hours
|Samina on 2020-03-28 21:18:04|| |
Hi Can thus be used to paint 12mm mdf to make it fire rated to use as a meter board? How long is the fire protection? Thank You Samina
Envirograf ES/VFR White Fire Protection Coating is suitable for upgrading new and already coated timber surfaces to British Standard Class 0 & 1 and EU standard B/s1/d0. If 30min protection is required, instead see Thermoguard Timbercoat 30 & 60 Minute System.
Unfortunately, we no longer stock this product. Thermoguard Fire Varnish Basecoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use. Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your...