Envirograf HW Translucent Top Coat
Envirograf HW Translucent Top Coat is a spirit based wood stain to apply over Envirograf HW02N Clear Intumescent Coating. Available in a satin finish and suitable for internal or external use.
All surfaces should be clean, dry and free from contamination.
Envirograf HW Translucent Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
- For internal use apply 1 coat at 10 – 12m² per litre
- For external use apply 2 coats at 10 – 12m² per litre
(Ensure end grain is treated with each coat)
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- Brush, Roller
- 10 - 12m² per litre
- Touch Dry
- 6 Hours
Be the first to ask a question about this product!