• Envirograf Intumescent Fire and Smoke Seals

Envirograf Intumescent Fire and Smoke Seals

Product 100

Unfortunately, we no longer stock this product. Norseal Pyroplex Timber Door Fire Seals With Pile may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.

Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your project and get 10% off.



Envirograf Fire and Smoke Seals are plastic intumescent fire and smoke seals with self-adhesive backing for ease of fixing. Supplied in two lengths; 1050mm or 2100mm. A version with intumescent fire seal only is available, for use where a smoke seal is not required. However, as smoke kills first, it is always advisable to fit combined intumescent fire and smoke seals. Used for fitting doors, door frames and windows. Once fitted, the plastic facing of the seals can be painted, however the brush or rubber smoke seal must not be painted. All offer 30 or 60 minutes protection and various sizes.

Features & Benefits

  • Fitted with self-adhesive backing to adhere into the rebate
  • Both brush and rubber smoke seals are available in a range of colours
  • Used for fitting to doors, door frames and windows
  • Once fitted, the plastic facing of the seals can be painted, although the smoke seal must not be painted


Can be fitted into doors, door frames and windows. Make a rebate in the frame or door to suit the size of the holder, adding 1mm to the width of the holder to allow for shrinkage of timber/paint. Peel off backing paper and fit seal into routed channel. Panel pins can be used for extra security of fixing if required. Once fitted the plastic facing of the seals can be painted, although the brush or rubber smoke seal must NOT be painted.

Important – 1-1½mm of the brush or rubber seal is held within the holder. Brush with fin is always ½mm higher than regular brush. Make allowance for this when specifying.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 100

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields