Envirograf Electrical Unit Protection SCU Intumescent Strips and Sleeves
|SCU1||Intumescent strip||50mm x 300mm|
|SCU2||Intumescent strip||75mm x 300mm|
|SCUB1||Intumescent strip||60mm x 100mm|
|SCUB2||Intumescent strip||60mm x 150mm|
|SCUB3||Intumescent strip||100mm x 150mm|
|SCUS1||Intumescent sleeve||85mm x 105mm x 40mm deep|
|SCUS2||Intumescent sleeve||40mm x 85mm x 40mm deep|
- SCUB1, 2 or 3 – to protect back entry opening
- SCU1 or 2 – to protect top and bottom cable entry openings
- SCUS1 or 2 – to protect hollow wall back entry opening
Part of the Electrical Consumer Unit range:
- Envirograf Enviroburst Automatic Fire Suppression System
- Envirograf Electrical Unit Protection SCU Intumescent Strips and Sleeves
- Envirograf Electrical Consumer Unit Fusebox Fire Protection System
- Envirograf Electrical Unit Protection SLM Insulation Liner
Though metal consumer units are non-combustible, components such as wires and conduits that lead into the unit are flammable and prone to overheating. By using Envirograf Electrical Unit Protection SCU Intumescent Strips and Sleeves to seal the entry points for these components, any breakout of fire will be contained within the unit. The intumescent coating expands during a fire to seal entry points shut and keeping fire and smoke contained within an Electrical Consumer Unit.
The strips and sleeves are easy to trim to
Electrical consumer units are a distribution board that contain components and devices such as circuit breakers, fuses and switches at the point of entry in a domestic home, commercial office or service, and industrial units like workshops and factories.
See the Application Guide for more and further information, in our downloads section below.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!