• Envirograf Animal Door Flap Protection
  • Envirograf Animal Door Flap Protection

Envirograf Animal Door Flap Protection

Product 118

Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.



Order Reference & Sizes

Colours available - brown, white, grey

Other sizes can be made to order.

Ref Staywell Flap Type Flap Cutout Size Flap Protector Cutout Size
FP01 Series 300/400/500 168mm x 175mm 228mm x 235mm
FP02 Series 600 (Small) 245mm x 150mm 305mm x 210mm
FP03 Series 600 (Medium) 348mm x 225mm 408mm x 285mm
FP04 Series 600 (Large) 451mm x 277mm 521mm x 347mm
FP05 Series 600 (Extra Large) 642mm x 366mm 722mm x 446mm
FP06 Series 700 (Small) 180mm x 155mm 240mm x 213mm
FP07 Series 700 (Medium) 265mm x 230mm 325mm x 290mm
FP08 Series 700 (Large) 354mm x 306mm 424mm x 376mm
FP09 Series 800 429mm x 291mm 499mm x 361mm
FP10 Series 900 169mm x 169mm 229mm x 229mm

Protect the integrity of fire doors in houses and apartments with Envirograf Animal Door Flap Protection for fire protection up to 60 minutes.

Cat flaps fit inside the metal frame unit, and a thermal cutout releases a fire curtain to drop down once temperatures, or the cat flap, reaches 70°C.

Important - not suitable for aluminium cat flaps.

For more information about this product's details, Test Data and Test Results included in manufacturer attachments, please contact our Technical Support team on 0113 245 5450, or send us a message here.


A rectangular or square opening is cut into the door or wall as specified for the particular unit (Petsafe/Staywell etc.) For example, for an opening of 348mm x 225mm specified by the flap manufacturer, the opening for the Envirograf® fire protection unit would need to be cut to 418mm x 295mm. each unit supplied has its own hole cutting requirements and these should be checked when ordering. 

The Envirograf® fire protection unit is supplied in two sections. The first part fits into the outside of the door or wall and has four fixing screws. The second part fits through the inside of the opening, into the first part and also has four fixing screws. The original branded cat/dog flap then screws to the face of the Envirograf® fire protection unit so it will be necessary to drill small holes in the metal face of the unit for the screws from the cat/dog flap.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 118

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields