Rust-Oleum Mathys Paracem Satin Matt
Rust-Oleum Mathys Paracem Satin Matt is a high quality acrylic wall paint for outside and inside use. Ideal for old or new substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels. Long lasting & highly aesthetic protection, easy to apply, clean and maintain, touch dry after just 40 minutes and available in almost any colour!
Rust-Oleum Mathys Paracem Satin Matt is a high quality acrylic wall paint for outside and inside use. Ideal for old or new substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels.
Features & Benefits
- Long lasting & highly aesthetic protection
- Easy to apply, clean and maintain
- Touch dry after just 40mins!
- Available in almost any colour
- Perfect saponification resistance
- Particularly high covering capacity
- Breathable (water vapour permeable)
- Excellent weather resistance
- Satin matt finish (also available in semi-gloss version)
The substrate must be sufficiently dry and stable; clean thoroughly. In case of fungal growth: treat first with an adequate moss-preventing product. On porous substrates apply first a coat of Mathys Parafix or Mathys Pegafix. On very smooth bricks, apply a first coat of Rust-Oleum Mathys Noxyde diluted with 25% water, or a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer. Impregnate old chalking paints, after cleaning, with a coat of Mathys Fixonal or Mathys Pegafix. Fill up holes and seal joints or fissures with Rust-Oleum Mathys Elastofill. If necessary, fill with Mathys Pegaflex. Flat down and remove dust. Hereafter, apply 1 - 2 coats of Rust-Oleum Mathys Paracem Satin Matt.
Directions for Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Application & Thinning
- Brush: Apply with flat brush.
- Roller: Apply with dispersion roller.
- Air-atomised spray: Dilute with water (3-5%).
- Airless spray: Nozzle: 013 - 018 / Pressure: 180 bars.
- Cleanup: Water.
- Thinning: For outside use: do not dilute. For inside use: dilute with 5-10% of water or even better with 5% of Mathys Fair Decor.
Minimum 5°C / Maximum 80% R.H.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||7-10m² per litre|
|Touch Dry||40 Mins|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close