Envirograf Surface Mounted Intumescent Fire & Smoke Seals
Envirograf Surface Mounted Intumescent Fire and Smoke Seals are surface-mounted intumescent fire or fire and smoke seals providing up to 1 hour fire protection, available in a range of colours and wood veneer finishes. Supplied as a pack with intumescent paper for use around lock and hinge areas. An alternative plain seal without brush seal to allow smoke detectors to be activated.
Shipping Options (Select at Checkout):
Envirograf Surface Mounted Intumescent Fire & Smoke Seals are surface-mounted intumescent fire or fire and smoke seals providing up to 1 hour fire protection, available in a range of colours and wood veneer finishes. Supplied as a pack with intumescent paper for use around lock and hinge areas. An alternative plain seal without brush seal to allow smoke detectors to be activated.
No routing is necessary, this seal can be fitted to door frames in minutes. Merely requires a 3.5mm or greater gap down the closing stile and across the door head. Fitted directly over hinges, no hinge bind and no gap necessary on hinge side. Once fitted the facing of the seal can be painted (the brush smoke seal must not be painted).
Peel off backing paper from the self-adhesive fixing strip starting on the brush side and, with the smoke seal touching the door stop, press the intumescent seal into position. The seal can be easily cut with a sharp knife to fit around lock areas.
Two 1100mm lengths are supplied for fitting down the closing stile and these are 2.4mm thick. One 1000mm long x 2.4mm thick strip is supplied for the head of the door frame.
Two 1100mm long strips (1mm thick in standard version and 2.3mm thick in plastic version) are supplied for the back of the door frame, and these adhere from top to bottom, over the hinges (this helps to cool the hinges and screws in a fire).
Intumescent paper is supplied for application around a rebated lock, to cool the lock in a fire. Remove lock from door, cut Envirograf intumescent paper to size, wrap it around lock and sandwich it between the lock and door as you replace the lock. Also place paper under the keep plate.
Labels are supplied for single or double doors, printed “Fire Door – Keep Shut”.
These seals comply with BS476 Part 22. The intumescent seals can be painted or varnished over but the brush must not be painted. If the brush is accidentally painted over it can be easily replaced by ordering Envirograf Product 72 brush seals as replacements.
Note: panel pins are supplied to secure through the brush smoke seal at each end and every 300mm apart along its length. These panel pins must be fitted as requested by building control officers and fire officers.
|ES/SDS||Single Door Set||Brown, White, Red, Black|
|ES/SDW||Single Door Set||Real Wood Veneer - Oak, Sapele or Ash|
|ES/DDS||Double Door Set||Brown, White, Red, Black|
|ES/DDW||Double Door Set||Real Wood Veneer - Oak, Sapele or Ash|
A plastic holder for surface mounting with intumescent on face and corner blade for the stop, giving both fire and smoke sealing. This is ideal for larger gaps and buckled doors. Very quick to fit and complete with lock paper and keep shut signs.
|ES/SDS/P||Single Door Set||Brown, White, Red, Black|
|ES/SDW/P||Single Door Set||Real Wood Veneer - Oak, Sapele or Ash|
|ES/DDS/P||Double Door Set||Brown, White, Red, Black|
|ES/DDW/P||Double Door Set||Real Wood Veneer - Oak, Sapele or Ash|
Note: ES/DDS/P is supplied with a brush seal for meeting stiles.
Plain seals without brush seal to allow smoke detectors to be activated
|NS/SDS||Single Door Set||Brown, White, Red, Black|
|NS/SDW||Single Door Set||Real Wood Veneer - Oak, Sapele or Ash|
|NS/DDS||Double Door Set||Brown, White, Red, Black|
|NS/DDW||Double Door Set||Real Wood Veneer - Oak, Sapele or Ash|
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Charlotte Bayliss on 2019-03-12 19:52:03|| |
Hi, please can you let me know how these are packaged and sent out - we are in Jersey and being quoted £55 for delivery which seems high so may send to family in the UK and get them to bring it over. Are they sent out in a long package or is it rolled up/smaller packaging? Thank you
They are sent out in long, rigid, cardboard tubes to keep the products straight and un-damaged.
|Ramesh Depala on 2019-02-11 15:19:29|| |
Hi, if we use your surface mounted strips would it provide a 30 min fire protection on a standard 33mm door?
Intumescent fire & smoke seals are just one element of protecting a door, many other elements may be required depending on your authorities assessment. All our fire protection products for doors can be found HERE but you should seek the advice of your authority first to check what they require to be carried out.